Saltar al contenido del producto
1 de 2

5 Inch Exhaust System for Dodge Ram 2500 3500 (1994-2002) 5.9L



Precio regular $942.95
Precio de oferta $942.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Heavy-Duty 5-Inch Stainless Exhaust System for 1994-2002 Dodge Ram 2500, Ram 3500 (BR/BE)

What it Does: This 5-inch stainless exhaust system replaces corroded factory tubing on 1994-2002 Dodge Ram 2500/3500 BR/BE trucks with the 6BT / ISB 5.9L Cummins to restore a sealed rear exhaust path.

The Stock Dodge Ram 2500, Ram 3500 Exhaust Corrosion Bottleneck

Factory steel exhaust tubing on BR/BE trucks equipped with the 6BT / ISB 5.9L Cummins degrades rapidly under thermal cycling and road-salt exposure. Pipe walls routinely rust through over the rear axle, while broken hangers let sections swing and leak soot at clamps. Elevated restriction increases exhaust gas temperatures and disrupts turbocharger backpressure stability. On 1998.5–2002 electronic trucks, severe upstream flow abnormalities can accompany boost codes like P0299 or P0234.

Common Symptoms of a Failing OEM Exhaust System

  • Soot & Leaks: Carbon tracking at clamps or rusted holes over the rear axle.
  • Temperature Rattles: Fatigued hangers allow pipe movement and vibration during thermal shifts.
  • Backpressure Stress: Restricted flow raises EGTs and can accompany P0299/P0234 boost faults.

The Heavy-Duty Stainless Exhaust Solution

This 5-inch stainless system (interchange 511111) replaces degraded factory piping with heat- and corrosion-resistant tubing built for diesel service. Its 5-inch diameter and rear-outlet geometry restore an unobstructed post-turbo flow path compared to worn stock steel. Included clamp-on pipe sections, hangers, and hardware allow mechanical alignment across compatible chassis without cutting OEM emissions hardware. Required emissions-control equipment must remain installed and operational.

What's Included

  • (1) 5-inch stainless exhaust pipe section set
  • Clamps, hangers, and mounting hardware

Technical Specifications

Fitment 1994-2002 Dodge Ram 2500, Ram 3500
Engine / Chassis 6BT / ISB 5.9L Cummins / BR/BE
Emissions & Substrate Stainless Steel / 5-Inch Rear Outlet
Installation Type Clamp-On Replacement (Wheelbase Adjustment Possible)
Replaces OEM Part # 511111

Compatibility

  • 1994-2002 Dodge Ram 2500 5.9L Cummins Diesel
  • 1994-2002 Dodge Ram 3500 5.9L Cummins Diesel

Frequently Asked Questions & Fitment Warnings

Does this fit the BR/BE Ram 2500, Ram 3500?

Yes. Direct fit for 1994-2002 Dodge Ram 2500/3500 with the 6BT / ISB 5.9L Cummins. Excludes Ram 1500 and 5.2L, 5.9L gas, or 8.0L engines.

Does this include a muffler or bypass emissions gear?

No. This 5-inch pipe kit excludes a muffler, and all required emissions-control equipment must remain installed.

Is mounting hardware included, and what post-install check is needed?

Yes. Clamps and hangers are included; check every joint at startup and recheck hangers after one heat cycle.

The Dodge Heavy-Duty Standard

Built for heavy towing thermal loads and salt-belt durability, this stainless system restores dependable diesel exhaust routing. Verify wheelbase alignment before final clamping.




Mueble

Hacer

Dodge

Tamaño del motor

  • 5.9L

Año

  • 1994
  • 1995
  • 1996
  • 1997
  • 1998
  • 1999
  • 2000
  • 2001
  • 2002

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

5 Inch Exhaust System for Dodge Ram 2500 3500 (1994-2002) 5.9L

$942.95