Passer au contenu du produit
1 sur 2

O2 Oxygen Sensor Upstream Downstream for Ford F-150 (2011-2014) 3.7L



Prix normal $95.95
Prix promotionnel $95.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit O2 Oxygen Sensor Kit for 2011-2014 Ford F-150 (P415)

What it Does: This 4-piece upstream and downstream O2 sensor kit restores closed-loop fuel metering and catalyst monitoring on the 2011-2014 Ford F-150 (P415) 3.7L Ti-VCT Cyclone V6.

The Stock Ford F-150 O2 Sensor Failure

On high-mileage P415 trucks with the 3.7L Ti-VCT Cyclone V6, OEM zirconia sensing elements suffer thermal cycling fatigue, carbon fouling, and internal heater circuit burnout. Because upstream sensors sit directly in high-temperature exhaust streams, repeated heat soak slows response and skews millivolt signals sent to the PCM. Once biased or open-circuited, the computer locks into rich fuel trims and triggers fault codes like P0135, P0155, or P0420/P0430.

Common Symptoms of a Failing OEM O2 Sensor

  • Check Engine Light & DTCs: Stored P0130, P0135, or P0155 faults from failed heater circuits or slow switching.
  • Rough Idle & Hesitation: Biased upstream feedback skews fuel trims, causing hesitation under load.
  • Failed Emissions & Fuel Waste: Incomplete readiness monitors and rich loops reduce mileage.

The Direct-Fit 4-Piece O2 Sensor Solution

Replacing all four sensors together eliminates bank-to-bank signal lag between worn and new units on your P415 F-150. Built to interchange directly with OEM reference 234-4489, each sensor uses a fast-light-off internal heater, a stainless steel housing, and factory-matched connectors for plug-and-play installation without wire splicing. Hand-threading each body while keeping anti-seize strictly off the sensing tip ensures accurate stoichiometric PCM feedback and reliable catalyst monitoring.

What's Included

  • 2 Upstream Oxygen Sensors
  • 2 Downstream Oxygen Sensors

Technical Specifications

Fitment 2011-2014 Ford F-150
Engine / Chassis 3.7L Ti-VCT Cyclone V6 / P415
Emissions & Sensor Spec Heated Zirconia / Pre-Cat & Post-Cat Set
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Splicing)
Replaces OEM Part # 234-4489

Compatibility

  • 2011-2014 Ford F-150 3.7L (Verify displacement, year, and connector style)

Frequently Asked Questions & Fitment Warnings

Does this fit the P415 F-150?

Yes. Direct fit for 2011-2014 Ford F-150 3.7L Ti-VCT Cyclone V6 models. Excludes 3.5L EcoBoost, 5.0L, and 6.2L engines or other model years.

Will this clear P0135/P0155 or P0420/P0430 codes?

Yes, if worn sensors caused the fault. Replacing with 234-4489 restores valid switching; clear DTCs and complete a drive cycle afterward.

Is wire splicing or anti-seize required?

No splicing is needed. Connectors match factory wiring; hand-thread before torquing and keep anti-seize off the sensing tip.

The Ford Heavy-Duty Standard

Built for truck duty cycles, this matched kit maintains stable air-fuel ratios under towing heat, keeping your P415 efficient and emissions-ready.




Ajustement

Faire

Ford

Cylindrée

  • 3.7L

Année

  • 2011
  • 2012
  • 2013
  • 2014

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

O2 Oxygen Sensor Upstream Downstream for Ford F-150 (2011-2014) 3.7L

$95.95