Passer au contenu du produit
1 sur 4

O2 Oxygen Sensor Upstream Downstream for Cadillac CTS (2008-2011) 3.6L



Prix normal $77.95
Prix promotionnel $77.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Sensor Kit for 2008-2011 Cadillac CTS (GMX322)

What it Does: This 4-piece O2 sensor kit monitors pre- and post-cat exhaust oxygen on the 2008-2011 Cadillac CTS (GMX322) 3.6L V6 to regulate fuel trim and catalyst efficiency.

The Stock Cadillac CTS Oxygen Sensor Failure

Factory O2 sensors on the GMX322 CTS 3.6L V6 (LY7/LLT) endure severe exhaust heat soak, thermal cycling, and carbon fouling. As the internal zirconia element ages or the heater circuit burns out, voltage switching slows and biases ECM fuel-trim feedback. Replacing one unit leaves worn partner sensors on the opposite bank, triggering P0133, P0153, P0135, P0141, or P0420/P0430 codes and compromising emissions readiness.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Heater faults (P0135, P0141, P0155, P0161), slow response (P0133, P0153), or catalyst codes (P0420).
  • Rough Idle & Hesitation: Biased upstream voltage skews fuel trims, causing uneven idle and throttle stumble.
  • Failed Emissions & Fuel Economy: Incomplete readiness monitors and over-fueling raise tailpipe emissions and fuel consumption.

The Direct-Fit Oxygen Sensor Solution

This matched 4-piece kit restores bank-to-bank air-fuel monitoring across pre-cat and post-cat positions on the GMX322 platform. Each sensor utilizes a thermal-shock-resistant zirconia sensing element inside a corrosion-resistant stainless steel housing with factory-crimped OEM connectors for splice-free plug-and-play installation. Servicing all four positions together eliminates voltage lag between Bank 1 and Bank 2, letting the ECM stabilize stoichiometric fueling and complete emissions monitors.

What's Included

  • 2 Upstream Oxygen Sensors (Pre-Catalytic Converter)
  • 2 Downstream Oxygen Sensors (Post-Catalytic Converter)

Technical Specifications

Fitment 2008-2011 Cadillac CTS
Engine / Chassis 3.6L V6 (LY7/LLT) / GMX322
Emissions & Sensing Element Heated Zirconia / Upstream & Downstream (4-Sensor Set)
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Splicing)
Replaces OEM Part # 234-4818, 234-4819, 2344818, 2344819

Compatibility

  • 2008-2011 Cadillac CTS 3.6L V6

Frequently Asked Questions & Fitment Warnings

Does this fit the GMX322 CTS?

Yes. Direct fit for 2008-2011 Cadillac CTS (GMX322) 3.6L V6 models. Confirm engine, year, and connector style; excludes 2.0L, 3.0L, and 6.2L trims.

Will this clear P0135 or P0420 codes?

Yes, for sensor faults. Replaces failed heaters (P0135/P0141) and slow sensors (P0133/P0153). Clear codes and complete a drive cycle; persistent P0420 codes indicate converter failure.

Is wire splicing or special prep needed?

No splicing required. Uses OEM connectors. Keep grease and anti-seize off the sensor tip, hand-thread first, and torque to spec.

The Cadillac Precision Standard

Engineered for the GMX322 Cadillac platform, this 4-sensor kit restores OEM closed-loop fuel control and CEL-free ECM operation across all pre-cat and post-cat exhaust zones.




Ajustement

Faire

Cadillac

Cylindrée

  • 3.6L

Année

  • 2008
  • 2009
  • 2010
  • 2011

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

O2 Oxygen Sensor Upstream Downstream for Cadillac CTS (2008-2011) 3.6L

$77.95