O2 Oxygen Sensor Upstream Downstream for Ford F-150 (2011-2014) 3.7L
No se pudo cargar la disponibilidad de recogida
- Pago totalmente seguro
- Con la confianza de miles de personas
- Calificado y revisado
¿Lo quieres pronto ? Haz tu pedido antes de
Compre con seguridad
Asegure su experiencia de compra con varios métodos de pago seguros y confiables.
Direct-Fit O2 Oxygen Sensor Kit for 2011-2014 Ford F-150 (P415)
What it Does: This 4-piece upstream and downstream O2 sensor kit restores closed-loop fuel metering and catalyst monitoring on the 2011-2014 Ford F-150 (P415) 3.7L Ti-VCT Cyclone V6.
The Stock Ford F-150 O2 Sensor Failure
On high-mileage P415 trucks with the 3.7L Ti-VCT Cyclone V6, OEM zirconia sensing elements suffer thermal cycling fatigue, carbon fouling, and internal heater circuit burnout. Because upstream sensors sit directly in high-temperature exhaust streams, repeated heat soak slows response and skews millivolt signals sent to the PCM. Once biased or open-circuited, the computer locks into rich fuel trims and triggers fault codes like P0135, P0155, or P0420/P0430.
Common Symptoms of a Failing OEM O2 Sensor
- Check Engine Light & DTCs: Stored P0130, P0135, or P0155 faults from failed heater circuits or slow switching.
- Rough Idle & Hesitation: Biased upstream feedback skews fuel trims, causing hesitation under load.
- Failed Emissions & Fuel Waste: Incomplete readiness monitors and rich loops reduce mileage.
The Direct-Fit 4-Piece O2 Sensor Solution
Replacing all four sensors together eliminates bank-to-bank signal lag between worn and new units on your P415 F-150. Built to interchange directly with OEM reference 234-4489, each sensor uses a fast-light-off internal heater, a stainless steel housing, and factory-matched connectors for plug-and-play installation without wire splicing. Hand-threading each body while keeping anti-seize strictly off the sensing tip ensures accurate stoichiometric PCM feedback and reliable catalyst monitoring.
What's Included
- 2 Upstream Oxygen Sensors
- 2 Downstream Oxygen Sensors
Technical Specifications
| Fitment | 2011-2014 Ford F-150 |
|---|---|
| Engine / Chassis | 3.7L Ti-VCT Cyclone V6 / P415 |
| Emissions & Sensor Spec | Heated Zirconia / Pre-Cat & Post-Cat Set |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Splicing) |
| Replaces OEM Part # | 234-4489 |
Compatibility
- 2011-2014 Ford F-150 3.7L (Verify displacement, year, and connector style)
Frequently Asked Questions & Fitment Warnings
Does this fit the P415 F-150?
Yes. Direct fit for 2011-2014 Ford F-150 3.7L Ti-VCT Cyclone V6 models. Excludes 3.5L EcoBoost, 5.0L, and 6.2L engines or other model years.
Will this clear P0135/P0155 or P0420/P0430 codes?
Yes, if worn sensors caused the fault. Replacing with 234-4489 restores valid switching; clear DTCs and complete a drive cycle afterward.
Is wire splicing or anti-seize required?
No splicing is needed. Connectors match factory wiring; hand-thread before torquing and keep anti-seize off the sensing tip.
The Ford Heavy-Duty Standard
Built for truck duty cycles, this matched kit maintains stable air-fuel ratios under towing heat, keeping your P415 efficient and emissions-ready.
Mueble
Mueble
|
Hacer |
Ford |
|---|---|
|
Tamaño del motor |
|
|
Año |
|
Garantía
Garantía
Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

Compras seguras
En nuestra tienda Shopify, priorizamos tu seguridad. Así es como garantizamos una experiencia de compra segura:
1. Transacciones seguras: utilizamos encriptación avanzada para proteger su información personal y de pago, garantizando que se transmita y resguarde de forma segura.
2. Pasarelas de pago confiables: Nuestra tienda se integra con pasarelas de pago confiables, lo que garantiza que sus transacciones se procesen de forma segura y eficiente.
3. Privacidad de datos: Su privacidad es nuestra máxima prioridad. Seguimos estrictas políticas de protección de datos para mantener la confidencialidad y seguridad de su información personal.
4. Plataforma segura: Shopify ofrece funciones de seguridad sólidas y monitoreo continuo contra vulnerabilidades, lo que garantiza un entorno de compra seguro.
5. Comerciantes verificados: Somos un comerciante verificado en Shopify, comprometido a proporcionar productos auténticos y de alta calidad.
6. Políticas transparentes: Nuestras políticas claras de devolución, reembolso y envío brindan tranquilidad, sabiendo que respaldamos nuestros productos.
7. Atención al cliente: Nuestro dedicado equipo de atención al cliente está listo para ayudarle con cualquier inquietud o pregunta que pueda tener.
Compre con confianza en nuestra tienda Shopify, donde su seguridad y satisfacción son nuestras principales prioridades.
$95.95