Turbo Kit for Pontiac Firebird (1993-1997) 5.7L LT1

Complete twin-turbo intercooled package for the Pontiac Firebird (1993–1997) with the 5.7L LT1. It pairs two stainless tubular manifolds (1-3/4" primaries, V-band collectors) with two T3/T4 hybrid turbos, a front-mount intercooler, dual oiling kits, boost controller, blow-off valve, turbo timer, battery relocation, boost gauge and fuel-system parts in one box. Most installs keep A/C and power steering. On a stock LT1, plan on a low-boost street tune around 8–10 psi. The 1100 hp figure is a twin hardware ceiling with a built engine and supporting mods, not a dyno result for a stock F-body. Engine code reference: LT1.

Why this kit

• Twin T3/T4 hybrid turbos with .57 trim compressors and .50 / .63 A/R housings
• 321 stainless tubular manifolds with 1-3/4" primaries and V-band to T3 adapters
• Front-mount intercooler, dual oiling kits and battery relocation
• Boost controller, blow-off valve, turbo timer, boost gauge and air filters included

Package Includes

• (2) T3/T4 hybrid turbochargers with oil fitting gaskets and mounting studs
• (2) TIG-welded 321 stainless tubular turbo manifolds, 1-3/4" primaries, 2.5" V-band flanges, ported and polished, with V-band to T3 adapters
• (1) Front-mount aluminum intercooler
• (1) Aluminum intercooler piping kit: (2) 2.5" straight pipes, (2) 90°, (2) 60°, (2) 45° bends, (2) 2.5" 90° silicone couplers, (6) 2.5" straight silicone couplers, (16) stainless worm-gear clamps
• (2) Turbo oil line kits: high-strength feed lines, high-temp 550 psi returns, fittings, gaskets and hardware
• (1) Manual boost controller with install kit
• (1) Blow-off valve kit with install kit
• (1) Battery relocation kit, full aluminum, cables, straps and hardware
• (1) Slim reversible cooling fan
• (1) Electronic turbo timer with LED display and wiring
• (1) Adjustable fuel pressure regulator with gauge plus fuel filter
• (1) Oil catch can with install kit
• (1) Heat wrap roll
• (1) Boost gauge, 52 mm, backlit
• (2) High-flow washable air filters

Turbocharger Specs

• Type: T3/T4 hybrid each, wet-float bearings, balanced
• Compressor: .57 trim wheel, .50 A/R housing, 3" inlet, 2" outlet
• Turbine: .63 A/R housing via V-band to T3 adapters
• Oil inlet: 1/8" NPT
• Hardware ceiling cited around 1100 hp twin potential with a built engine and supporting mods — not a stock-car dyno result. Plan on 8–10 psi on a healthy stock LT1 with a proper tune

Exact Fitment — Pontiac Firebird

• 1993–1997 Pontiac Firebird with the 5.7L LT1
• One Make per listing — this product is Pontiac only
• Not for 1982–1992 small-block or 1998–2002 LS1 F-bodies — those have their own listings
• Chassis-specific downpipes and exhaust beyond the turbo flanges are not included
• Intercooler piping is universal and needs cutting and fitting per chassis

Not Included

• Chassis-specific downpipes and exhaust beyond the turbo flanges
• Larger injectors, fuel pump and ECU tune (required)
• Clutch upgrade and wideband
• Oil-pan return bung if your setup needs one

Installation Notes

• Professional installation strongly recommended. Expect cutting and fitting of the universal piping
• The manifolds are stainless tubular with V-band collectors and T3 adapters for turbo clocking
• Oil return must drain by gravity on both turbos; prime each turbo with oil before first start and check for leaks
• Blow-off valve flanges are installed at your discretion
• Keep boost near 8–10 psi until fuel and tune are upgraded, and let the turbo timer handle cool-down

FAQs

Does this fit an LS1 Camaro or Firebird? No. This listing is 1993–1997 LT1 only. LS1 cars have a separate kit.

How much power will it make? A healthy stock LT1 at about 8–10 psi with a proper tune is the street baseline. 1100 hp is a twin hardware ceiling with a built engine and full supporting mods.

Can I keep A/C and power steering? Most installs keep both; confirm clearance during mock-up.

Manual or automatic? Fits either when the engine matches.

Is it plug-and-play? No. You still need injectors, a fuel pump, an ECU tune, downpipes and some pipe fitting.