Turbo Hardware Mounting Kit for Ford F-250 F-350 F-450 F-550 (2008-2010) 6.4L

OEM-Spec Turbo Hardware Mounting Kit for 2008-2010 Ford F-250, F-350, F-450, F-550 (Super Duty P473)

What it Does: The Turbo Hardware Mounting Kit provides all required high-temperature seals, copper washers, O-rings, and class-rated fasteners to correctly seal and secure the compound turbocharger system on the 2008-2010 Ford Super Duty to eliminate boost and exhaust leaks.

The Stock Ford F-250, F-350, F-450, F-550 Turbo Hardware Failure

The sequential turbo setup on the 6.4L Powerstroke operates under extreme exhaust gas temperatures (EGTs) and high drive pressures that quickly degrade factory exhaust gaskets and elastomeric seals. Thermal cycling induces bolt stretch and flange warping, resulting in high-pressure boost leaks between turbo housings, soot leakage at the up-pipe joints, and degraded low-pressure drain tube O-rings that trigger persistent crankcase oil leaks.

The Engineering Solution

This comprehensive installation kit restores pressure integrity across the entire turbo assembly. Featuring high-grade stainless mesh gaskets, heat-treated copper sealing crush washers, and high-tensile 11 turbocharger mounting bolts, this kit prevents fastener relaxation under continuous thermal load. Fluoroelastomer (FKM) and Viton-equivalent compound O-rings resist oil coking and withstand extreme oil feed line pressures, restoring factory boost response and preventing blow-by at vital turbo-to-pedestal junctions.

What's Included

• 1 Mesh Gasket
• 1 Low Pressure to High Pressure Turbocharger Seal
• 1 Low Pressure Turbocharger Drain Tube Seal
• 1 Turbocharger Oil Feed Line O-Ring
• 2 High Pressure Turbocharger Drain Tube O-Rings
• 2 Turbocharger Up-Pipe to Turbocharger Gaskets
• 8 Copper Sealing Washers
• 11 Turbocharger Mounting Bolts

Technical Specifications

Compatibility

• 2008-2010 Ford F-250 Super Duty 6.4L Turbo Diesel
• 2008-2010 Ford F-350 Super Duty 6.4L Turbo Diesel
• 2008-2010 Ford F-450 Super Duty 6.4L Turbo Diesel
• 2008-2010 Ford F-550 Super Duty 6.4L Turbo Diesel

Frequently Asked Questions & Fitment Warnings

Does this fit the Super Duty (P473) F-250, F-350, F-450, F-550?

Yes, this is a direct fit for the 2008-2010 Ford F-250, F-350, F-450, F-550 equipped with the 6.4L Powerstroke diesel engine.

Is a replacement turbocharger included in this kit?

No, this package includes the essential hardware, crush washers, seals, and gaskets required to remount and seal existing or replacement turbochargers.

The Ford Heavy-Duty Standard

Engineered to handle severe duty cycles and sustained gross vehicle weight ratings (GVWR), this complete mounting kit ensures your compound turbo setup maintains air and oil charge integrity under maximum towing loads.