Zum Produktinhalt springen
1 von 6

Performance Water Pump Timing Belt Kit for Honda Crosstour (2010-2015) 3.5L



Regulärer Preis $180.95
Angebotspreis $180.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

Complete 9-Piece Water Pump & Timing Belt Kit for 2010-2015 Honda Crosstour (TF1/TF2)

What it Does: This 9-piece timing belt and water pump service kit restores synchronous camshaft-to-crankshaft timing and mechanical coolant circulation on the 2010-2015 Honda Crosstour (TF1/TF2) equipped with the J35Z2 or J35Y1 3.5L V6 interference engine.

The Stock Honda Crosstour Timing Drive & Water Pump Failure

On the TF1/TF2 Crosstour powered by the interference J35Z2 and J35Y1 3.5L V6 engines, heat cycling degrades the factory timing belt rubber compound, hydraulic tensioner seals, and mechanical water pump shaft bearings. As hydraulic tensioner fluid bleeds down, belt slack induces timing jitter and triggers cam/crank correlation faults like P0016 or P0340. Simultaneously, weeping front cam/crank seals contaminate the belt surface, while worn impeller bearings leak coolant from the weep hole, risking overheating or catastrophic valve-to-piston contact if the belt snaps.

Common Symptoms of a Failing OEM Timing Belt & Water Pump

  • Check Engine Light / Timing Correlation DTCs: Belt stretch or tensioner bleed-down triggers cam/crank synchronization faults such as P0016, P0340, or P0335.
  • Front-Engine Noise & Coolant Weepage: Cold-start hydraulic tensioner chatter, dry idler bearing whine, or coolant dripping from the water pump housing behind the timing cover.
  • Overheating & Interference Failure Risk: Compromised mechanical pump circulation elevates coolant temperatures, while belt tooth shear causes severe valvetrain damage on the 3.5L V6.

The Direct-Fit 9-Piece Front-Engine Service Solution

Engineered to replace every wear item behind the timing cover in a single teardown, this kit pairs a high-tensile fiberglass-reinforced timing belt (14400-RCA-A01) with a precision-cast mechanical water pump (19200-RDV-J01) and pre-formed gasket. Low-drag sealed bearing idler and tensioner pulleys operate alongside a calibrated hydraulic tensioner (14520-RCA-A01) to maintain constant belt preload across high-RPM shifts. Included front camshaft and crankshaft seals plus a fresh serpentine drive belt (56992-RV0-A05) restore factory sealing and accessory drive alignment with direct bolt-on geometry.

What's Included

  • 1x Timing Belt
  • 1x Idler Roller / Pulley
  • 1x Tensioner Roller / Pulley
  • 1x Mechanical Water Pump with Pre-Formed Gasket
  • 1x Hydraulic Tensioner
  • 2x Front Camshaft Seals
  • 1x Front Crankshaft Seal
  • 1x Serpentine Accessory Drive Belt

Technical Specifications

Fitment 2010-2015 Honda Crosstour
Engine / Chassis J35Z2 / J35Y1 3.5L V6 / TF1/TF2
Stock Engine Output 271–278 hp / 252–254 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 14400-RCA-A01, 14550-RCA-A01, 14510-RCA-A01, 19200-RDV-J01, 14520-RCA-A01, 91213-R70-A01, 91213-R70-A02, 91212-R70-A01, 91212-R70-A02, 38920-RCA-A01, 38920-RCA-A03, 56992-RV0-A05

Compatibility

  • 2010-2011 Honda Accord Crosstour — 3.5L V6 Gas Naturally Aspirated (TF1/TF2)
  • 2012-2015 Honda Crosstour — 3.5L V6 Gas Naturally Aspirated (TF1/TF2)
  • Fits manual or automatic transmissions when year, model, and 3.5L displacement match; excludes 2.4L 4-cylinder timing-chain models.

Frequently Asked Questions & Fitment Warnings

Does this fit the TF1/TF2 Crosstour?

Yes. This is a direct fit for the 2010-2015 Honda Crosstour (including 2010-2011 Accord Crosstour) equipped with the J35Z2 or J35Y1 3.5L V6 engine. Does not fit 2.4L four-cylinder Crosstour models, which utilize a timing chain.

Does this kit include both the water pump and timing belt, and must coolant be replaced?

Yes. The 9-piece kit includes the timing belt (14400-RCA-A01), mechanical water pump (19200-RDV-J01) with pre-formed gasket, idler/tensioner pulleys, hydraulic tensioner, cam/crank seals, and serpentine belt; draining, refilling, and bleeding the cooling system is required after pump installation.

What installation prep and hardware considerations apply to this front-engine service?

All nine timing, sealing, and drive components bolt directly to factory locations, while spark plugs and coolant are not included. Installation requires supporting the engine, removing the crankshaft pulley and timing covers, aligning factory timing marks, torquing fasteners to specification, and bleeding the cooling circuit.

The Honda Precision Maintenance Standard

Replacing the timing belt, hydraulic tensioner, seals, and water pump together protects the J35Z2 and J35Y1 interference valvetrain without opening the front cover twice. Machined to factory dimensional tolerances, this service kit maintains steady coolant flow efficiency, smooth VTEC throttle response, and long-term daily reliability.




Passgenauigkeit

Erstellen

Honda

Hubraum

  • 3.5L

Jahr

  • 2010
  • 2011
  • 2012
  • 2013
  • 2014
  • 2015

Garantie

Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

Performance Water Pump Timing Belt Kit for Honda Crosstour (2010-2015) 3.5L

$180.95