Performance Water Pump Timing Belt Kit for Acura TL (2009-2014) 3.5L 3.7L
Die Abholverfügbarkeit konnte nicht geladen werden
- Garantierte Passgenauigkeit
- Leistungsgeprüft
- Lebenslange Garantie
Sie möchten es bald? Bestellen Sie innerhalb von
Sicher einkaufen
Sicherer Bezahlvorgang mit vertrauenswürdigen Zahlungsanbietern.
Direct-Fit Water Pump & Timing Belt Kit for 2009-2014 Acura TL (UA8 / UA9)
What it Does: This 9-piece timing belt and mechanical water pump service kit synchronizes valvetrain-to-crankshaft phase while restoring factory coolant circulation on the 2009-2014 Acura TL (UA8/UA9) powered by the J35Z6 3.5L and J37A4 3.7L interference V6 engines.
The Stock Acura TL Timing Drive & Water Pump Failure
On the UA8 (J35Z6 3.5L) and UA9 (J37A4 3.7L) interference SOHC V6 engines, prolonged heat soak degrades the factory HNBR timing belt teeth and hardens the hydraulic tensioner piston seals. As internal hydraulic damping bleeds down, belt slack induces cold-start timing slap and cam-to-crank correlation faults like P0016. Simultaneously, the mechanical water pump shaft seal and roller bearings wear out, weeping coolant behind the timing cover and risking sudden timing belt jump and catastrophic piston-to-valve contact.
Common Symptoms of a Failing OEM Timing Belt & Water Pump
- Cam/Crank Correlation DTCs: Triggering check engine codes such as P0016 or P0340 caused by a stretched belt or bled-down hydraulic tensioner allowing phase drift.
- Front Cover Rattling & Weep Hole Leaks: Audible cold-start tensioner clatter, bearing whine from dry idler pulleys, or coolant seepage beneath the front crankshaft pulley.
- Engine Overheating & Belt Snap Risk: Rising coolant temperatures or sudden belt tooth shear on these interference engines, causing immediate stall and severe internal valvetrain damage.
The Direct-Fit 9-Piece Timing & Cooling Solution
This comprehensive kit consolidates all front-engine wear items into a single service interval, pairing a reinforced timing belt (14400-RCA-A01) with a direct-fit mechanical water pump (19200-RDV-J01) and pre-formed gasket. Precision-machined idler and tensioner rollers alongside a fresh hydraulic tensioner (14520-RCA-A01) maintain consistent belt tracking and load tension across high-RPM VTEC operation. Factory-spec front camshaft seals, crankshaft seal, and a new serpentine drive belt (38920-RCA-A01) restore oil-tight sealing and accessory drive grip without re-opening the front cover.
What's Included
- 1 Timing Belt
- 1 Idler Roller / Pulley
- 1 Tensioner Roller / Pulley
- 1 Mechanical Water Pump and Pre-Formed Gasket
- 1 Hydraulic Tensioner
- 2 Front Camshaft Seals
- 1 Front Crankshaft Seal
- 1 Serpentine Drive Belt
Technical Specifications
| Fitment | 2009-2014 Acura TL |
|---|---|
| Engine / Chassis | J35Z6 3.5L / J37A4 3.7L V6 / UA8 / UA9 |
| Stock Engine Output | 280 hp / 254 lb-ft (3.5L) | 305 hp / 273 lb-ft (3.7L) |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
| Replaces OEM Part # | 14400-RCA-A01, 14550-RCA-A01, 14510-RCA-A01, 19200-RDV-J01, 14520-RCA-A01, 91213-R70-A01, 91213-R70-A02, 91212-R70-A01, 91212-R70-A02, 38920-RCA-A01, 38920-RCA-A03, 56992-RV0-A05 |
Compatibility
- 2009-2014 Acura TL — 3.5L Gas Naturally Aspirated (UA8 / J35Z6, Manual or Automatic)
- 2009-2014 Acura TL — 3.7L Gas Naturally Aspirated (UA9 / J37A4, Manual or Automatic)
Frequently Asked Questions & Fitment Warnings
Does this fit the UA8 / UA9 TL?
Yes. This is a direct fit for the 2009-2014 Acura TL equipped with the J35Z6 3.5L or J37A4 3.7L naturally aspirated V6 engine, supporting both automatic and manual transmissions. Verify your exact model year and engine displacement prior to ordering; spark plugs and coolant are not included.
Does this kit include both the water pump and timing belt, and will it resolve P0016 timing faults?
Yes. You receive the timing belt (14400-RCA-A01), mechanical water pump (19200-RDV-J01) with gasket, pulleys, hydraulic tensioner, front cam/crank seals, and serpentine belt. Replacing a stretched belt and weak tensioner restores proper cam-to-crank phase alignment to eliminate mechanical P0016 faults.
Do I need to replace coolant and bleed the system during installation?
Yes. Swapping the front-engine mechanical water pump requires draining the cooling system. After torquing all pulleys, covers, and the crankshaft bolt to factory specification, refill the cooling system and bleed all trapped air before road testing.
The Acura Precision Standard
Built to maintain strict cam-to-crank phase accuracy and reliable thermal transfer across high-revving VTEC J-series V6 engines. Engineered for leak-free sealing, quiet valvetrain operation, and factory-spec service longevity.
Passgenauigkeit
Passgenauigkeit
|
Erstellen |
Acura |
|---|---|
|
Hubraum |
|
|
Jahr |
|
Garantie
Garantie
Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

Sicher einkaufen
In unserem Shopify-Store legen wir größten Wert auf Ihre Sicherheit. So gewährleisten wir ein sicheres Einkaufserlebnis:
1. Sichere Transaktionen: Wir verwenden fortschrittliche Verschlüsselung, um Ihre persönlichen Daten und Zahlungsinformationen zu schützen und sicher zu übertragen.
2. Vertrauenswürdige Zahlungs-Gateways: Unser Store ist in vertrauenswürdige Zahlungs-Gateways integriert, um sicherzustellen, dass Ihre Transaktionen sicher und effizient verarbeitet werden.
3. Datenschutz: Ihre Privatsphäre hat bei uns oberste Priorität. Wir befolgen strenge Datenschutzrichtlinien, um Ihre persönlichen Daten vertraulich und sicher zu behandeln.
4. Sichere Plattform: Shopify bietet robuste Sicherheitsfunktionen und eine kontinuierliche Überwachung gegen Schwachstellen, um eine sichere Einkaufsumgebung zu gewährleisten.
5. Verifizierte Händler: Wir sind ein verifizierter Händler auf Shopify und verpflichten uns, authentische und qualitativ hochwertige Produkte anzubieten.
6. Transparente Richtlinien: Unsere klaren Rückgabe-, Rückerstattungs- und Versandrichtlinien geben Ihnen die Gewissheit, dass wir hinter unseren Produkten stehen.
7. Kundensupport: Unser engagiertes Kundensupport-Team steht Ihnen bei allen Anliegen und Fragen gerne zur Verfügung.
Kaufen Sie mit Vertrauen in unserem Shopify-Store ein, wo Ihre Sicherheit und Zufriedenheit unsere obersten Prioritäten sind.
$180.95