Performance Timing Chain Kit for Saturn Vue (2008-2010) 3.6L
Die Abholverfügbarkeit konnte nicht geladen werden
- Garantierte Passgenauigkeit
- Leistungsgeprüft
- Lebenslange Garantie
Sie möchten es bald? Bestellen Sie innerhalb von
Sicher einkaufen
Sicherer Bezahlvorgang mit vertrauenswürdigen Zahlungsanbietern.
Direct-Fit Performance Timing Chain Kit for 2008-2010 Saturn Vue (GMT179)
What it Does: This performance timing chain kit synchronizes the crankshaft and dual overhead camshafts on the 2008-2010 Saturn Vue (GMT179) equipped with the LY7 3.6L High Feature V6 engine.
The Stock Saturn Vue Timing Drive Failure
The LY7 3.6L High Feature V6 in the GMT179 Saturn Vue uses a multi-chain timing drive vulnerable to oil aeration, extended drain intervals, and hydraulic tensioner bleed-down. Over time, primary and secondary link pins wear and elongate, while OEM plastic guide faces groove and fracture under thermal cycling. This slack retards camshaft phasing relative to the crankshaft, triggering P0008, P0016, or P0017 cam-correlation faults and risking piston-to-valve contact if a chain jumps a tooth.
Common Symptoms of a Failing OEM Timing Chain Assembly
- Check Engine Light / DTCs: Camshaft-to-crankshaft correlation codes such as P0008, P0016, and P0017 triggered by chain stretch.
- Audible Cold-Start Rattle: Metallic slapping from the front timing cover caused by bled-down tensioners and worn guide rails.
- Drivability & Engine Risk: Rough idle, sluggish acceleration, and severe valvetrain damage if a loose chain skips sprocket teeth.
The Direct-Fit Multi-Chain Timing Kit Solution
This direct-fit timing chain kit restores factory synchronization on the LY7 3.6L V6 using high-tensile steel roller-link primary and secondary chains built to resist pitch elongation. Matched hardened steel crankshaft and idler sprockets pair with reinforced polymer guide rails and calibrated hydraulic tensioners to maintain consistent chain preload across cold starts and high-RPM operation. All components install directly into OEM front-cover mounting bosses, replacing worn factory hardware matching OEM references 12600461, 12609258, and TKGM10436L.
What's Included
- 1x Primary Timing Chain
- 2x Secondary Timing Chains
- 1x Crankshaft Sprocket
- 2x Idler Sprocket Assemblies
- 4x Timing Chain Guides and Tensioners
Technical Specifications
| Fitment | 2008-2010 Saturn Vue |
|---|---|
| Engine / Chassis | LY7 3.6L High Feature V6 / GMT179 (Theta) |
| Stock Engine Output | 257 hp / 248 lb-ft |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
| Replaces OEM Part # | 12600461, 12609258, TKGM10436L |
Compatibility
- 2008-2010 Saturn Vue — 3.6L Gas Naturally Aspirated (Manual or Automatic Transmission)
Frequently Asked Questions & Fitment Warnings
Does this fit the GMT179 Vue?
Yes. This is a direct fit for the 2008-2010 Saturn Vue equipped with the LY7 3.6L engine (manual or automatic). Does not fit 2.4L or 2.8L models, and is not compatible with Chrysler 3.6L Pentastar engines.
Will this resolve P0008 or P0016 cam-correlation codes and cold-start rattle?
Yes. Replacing stretched chains, grooved guides, and weak tensioners together restores cam-to-crank alignment and eliminates cold-start slap, clearing P0008, P0016, and P0017 faults once oil passages are clean.
Is a water pump included, and how involved is installation?
No, a water pump is not included. This comprehensive front-engine service requires supporting the engine, removing the front timing cover, aligning factory timing marks, and torquing fasteners to vehicle specifications.
The Saturn Precision Standard
Engineered for exact cam-to-crank phasing and sustained oil-pressure stability, this complete timing drive kit restores quiet cold starts and dependable valvetrain control. Built to handle daily thermal cycling in the GMT179 Vue, it protects your LY7 3.6L V6 against timing slip and costly internal engine damage.
Passgenauigkeit
Passgenauigkeit
|
Erstellen |
Saturn |
|---|---|
|
Hubraum |
|
|
Jahr |
|
Garantie
Garantie
Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

Sicher einkaufen
In unserem Shopify-Store legen wir größten Wert auf Ihre Sicherheit. So gewährleisten wir ein sicheres Einkaufserlebnis:
1. Sichere Transaktionen: Wir verwenden fortschrittliche Verschlüsselung, um Ihre persönlichen Daten und Zahlungsinformationen zu schützen und sicher zu übertragen.
2. Vertrauenswürdige Zahlungs-Gateways: Unser Store ist in vertrauenswürdige Zahlungs-Gateways integriert, um sicherzustellen, dass Ihre Transaktionen sicher und effizient verarbeitet werden.
3. Datenschutz: Ihre Privatsphäre hat bei uns oberste Priorität. Wir befolgen strenge Datenschutzrichtlinien, um Ihre persönlichen Daten vertraulich und sicher zu behandeln.
4. Sichere Plattform: Shopify bietet robuste Sicherheitsfunktionen und eine kontinuierliche Überwachung gegen Schwachstellen, um eine sichere Einkaufsumgebung zu gewährleisten.
5. Verifizierte Händler: Wir sind ein verifizierter Händler auf Shopify und verpflichten uns, authentische und qualitativ hochwertige Produkte anzubieten.
6. Transparente Richtlinien: Unsere klaren Rückgabe-, Rückerstattungs- und Versandrichtlinien geben Ihnen die Gewissheit, dass wir hinter unseren Produkten stehen.
7. Kundensupport: Unser engagiertes Kundensupport-Team steht Ihnen bei allen Anliegen und Fragen gerne zur Verfügung.
Kaufen Sie mit Vertrauen in unserem Shopify-Store ein, wo Ihre Sicherheit und Zufriedenheit unsere obersten Prioritäten sind.
$445.95