Zum Produktinhalt springen
1 von 6

Performance Timing Chain Kit for Saturn Aura (2008-2009) 3.6L



Regulärer Preis $445.95
Angebotspreis $445.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

Direct-Fit Timing Chain Kit for 2008-2009 Saturn Aura (Epsilon)

What it Does: This complete Timing Chain Kit for the 2008-2009 Saturn Aura (Epsilon chassis) with the LY7 3.6L High Feature V6 synchronizes crankshaft and dual-overhead-camshaft rotation by replacing stretched primary/secondary chains, worn guides, tensioners, and sprockets as a matched set.

The Stock Saturn Aura Timing Drive Failure

On the Epsilon platform with the LY7 3.6L High Feature V6, factory timing chains experience premature pin wear and elongation under thermal cycling. As chain pitch increases and composite guide faces erode, hydraulic tensioners overextend and bleed down during cold starts. This slack creates phase drift between the dual overhead camshafts and crankshaft, setting codes like P0008, P0016, and P0017. Left unaddressed, excessive chain whip can jump sprocket teeth and cause internal engine damage.

Common Symptoms of a Failing OEM Timing Chain System

  • Check Engine Light / Correlation DTCs: Camshaft-to-crankshaft timing faults including P0008, P0009, P0016, and P0017 triggered by stretched chains exceeding ECU phase tolerances.
  • Cold-Start Metallic Rattle: Audible chain slap from the front timing cover during initial startup before hydraulic tensioners build oil pressure.
  • Drivability & Valvetrain Risk: Rough idle, sluggish throttle response, or catastrophic piston-to-valve contact if a worn chain jumps teeth.

The Direct-Fit High Feature V6 Timing Solution

This complete timing drive kit restores factory valve synchronization using matched primary and secondary chains, precision-machined crankshaft and idler sprockets, and four reinforced guides and tensioners. Replacing all wear components simultaneously eliminates residual slack caused by mating new chains to worn sprocket teeth. Engineered as a direct OEM replacement for part numbers 12600461, 12609258, and TKGM10436L, every component seats directly into factory mounting bosses under the front timing cover. This comprehensive service restores oil-damped chain tension and accurate cam-to-crank timing alignment.

What's Included

  • 1 Primary Timing Chain
  • 2 Secondary Timing Chains
  • 1 Crankshaft Sprocket
  • 2 Idler Sprocket Assemblies
  • 4 Timing Chain Guides and Tensioners

Technical Specifications

Fitment 2008-2009 Saturn Aura
Engine / Chassis LY7 3.6L High Feature V6 / Epsilon
Stock Engine Output 252 hp / 251 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 12600461, 12609258, TKGM10436L

Compatibility

  • 2008-2009 Saturn Aura — 3.6L Gas Naturally Aspirated (Manual or Automatic Transmission)

Frequently Asked Questions & Fitment Warnings

Does this fit the Epsilon Aura?

Yes. This is a direct fit for the 2008-2009 Saturn Aura equipped with the LY7 3.6L High Feature V6 engine (manual or automatic). Does not fit 2.4L, 2.8L, or Chrysler 3.6L Pentastar engines; confirm year, model, and displacement before ordering.

Will this resolve cam-correlation codes like P0008 or P0016, and is a water pump included?

Yes for mechanical timing codes, No on the water pump. Replacing stretched chains, guides, and tensioners corrects mechanical phase drift causing P0008, P0016, and P0017 once DTCs are cleared, while a water pump is not included in this timing-drive-only kit.

What does installation require for the 3.6L timing service?

Comprehensive front-engine service. Installation requires supporting the engine, removing the front timing cover, aligning crankshaft and camshaft timing marks in factory sequence, and torquing all fasteners to OEM specifications; professional installation is recommended if you lack timing-service tooling.

The Saturn Precision Standard

Engineered to meet OEM dimensional tolerances on the Epsilon platform, this timing chain kit maintains accurate valvetrain phasing and reliable cold-start oil pressure damping. Restore quiet, fault-free operation to your LY7 3.6L High Feature V6 without compromises in sprocket metallurgy or tensioner geometry.




Passgenauigkeit

Erstellen

Saturn

Hubraum

  • 3.6L

Jahr

  • 2008
  • 2009

Garantie

Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

Performance Timing Chain Kit for Saturn Aura (2008-2009) 3.6L

$445.95