Performance Timing Chain Kit for Ford Edge (2007-2010) 3.5L

Heavy-Duty Timing Chain and Water Pump Kit for 2007-2010 Ford Edge (CD3)

What it Does: The Performance Timing Chain Kit restores critical valvetrain synchronization and replaces the internal coolant pump on the 2007-2010 Ford Edge to prevent valve-to-piston interference and catastrophic oil contamination.

The Stock Ford Edge Timing & Water Pump Failure Points

The factory Duratec 35 3.5L V6 within the CD3 chassis routes its internal water pump off the primary timing chain. Over repeated thermal cycles, factory link plates suffer mechanical pitch elongation, triggering cam-crank correlation codes (P0016/P0018) and overextending hydraulic tensioners. Simultaneously, prolonged oil exposure embrittles OEM nylon-faced guide rails, causing guide fragmentation. Worse, when the internal factory water pump bearing or weep seal fails, coolant discharges straight into the engine crankcase, rapidly diluting lubrication and destroying main bearings.

The Engineering Solution

This master service kit utilizes heat-treated, shot-peened alloy steel link chains designed to resist pin shear and tensile elongation under dynamic valve spring loads. Paired with hardened induction-cut sprockets, wear-resistant synthetic composite guide rails, and heavy-duty hydraulic tensioners, it eliminates chain whip and stabilizes cam timing across the powerband. The included precision-machined internal water pump features an upgraded unitized seal assembly to isolate engine oil passages from coolant flow, preventing crankcase contamination.

What's Included

• 1 Primary Timing Chain (202 links)
• 2 Secondary Timing Chains (upper)
• 2 Cam Sprockets with bolts (25 teeth - exhaust)
• 1 Crank Sprocket (23 teeth)
• 1 Guide Rail (left - fixed - long)
• 1 Guide Rail (left - fixed - short)
• 1 Guide Rail (right - fixed - short)
• 1 Guide Rail (right - tensioner rail)
• 1 Primary Tensioner
• 1 Tensioner (upper - left)
• 1 Tensioner (upper - right)
• 1 Water Pump with gasket

Technical Specifications

Compatibility

• 2007-2010 Ford Edge 3.5L V6 DOHC 24-Valve (VIN C)

Frequently Asked Questions & Fitment Warnings

Does this fit the CD3 Edge?

Yes, this is a direct fit for the 2007-2010 Ford Edge equipped with the Duratec 35 3.5L engine.

Are timing marks indexed for assembly alignment?

Yes, the primary and secondary chains feature colored alignment links configured to index directly with the timing marks on the crank and cam sprockets.

The Ford Durability Standard

Built to handle severe thermal cycles and extended service intervals, this kit restores valvetrain reliability and ensures long-term operational integrity for daily driving and towing duty.