Performance Timing Chain Kit for Chevrolet Impala (2012-2015) 3.6L
Die Abholverfügbarkeit konnte nicht geladen werden
- Garantierte Passgenauigkeit
- Leistungsgeprüft
- Lebenslange Garantie
Sie möchten es bald? Bestellen Sie innerhalb von
Sicher einkaufen
Sicherer Bezahlvorgang mit vertrauenswürdigen Zahlungsanbietern.
Direct-Fit Performance Timing Chain Kit for 2012-2015 Chevrolet Impala (W-Body / Epsilon II)
What it Does: This complete performance timing chain kit synchronizes crankshaft and dual-overhead-camshaft rotation on the 2012-2015 Chevrolet Impala equipped with the LFX 3.6L High Feature V6 engine (W-Body / Epsilon II) to restore factory valve timing and eliminate chain slack.
The Stock Chevrolet Impala Timing Drive Failure
On the W-Body / Epsilon II Impala equipped with the LFX 3.6L High Feature V6, factory primary and secondary chains suffer pin-and-bushing wear under thermal cycling and extended oil intervals. As chains elongate and polymer guide faces groove, hydraulic tensioners exceed travel limits and lose cold-start damping. Resulting timing slack triggers cam-correlation faults like P0008, P0016, and P0017, risking tooth jumping and valvetrain contact.
Common Symptoms of a Failing OEM Timing Chain Assembly
- Check Engine Light / Correlation DTCs: Stored P0008, P0016, P0017, or P0018 codes caused by cam-to-crank phase deviation.
- Cold-Start Metallic Rattle: Audible slapping from the front timing cover before hydraulic tensioners build oil pressure.
- Drivability & Engine Risk: Rough idle, VVT hesitation, or severe piston-to-valve interference if a stretched chain jumps teeth.
The Direct-Fit Multi-Link Timing Drive Solution
Engineered as a complete timing overhaul replacing 12600461, 12609258, and TKGM10436L, this kit restores exact cam-to-crank geometry on the LFX 3.6L High Feature V6. High-tensile alloy steel primary and secondary chains resist pitch elongation under valvetrain load, paired with precision-machined crankshaft and idler sprockets for uniform tooth engagement. Low-friction guides and calibrated hydraulic tensioners maintain steady tension across cold starts and operating temperatures, bolting directly into factory locations.
What's Included
- 1 Primary Timing Chain
- 2 Secondary Timing Chains
- 1 Crankshaft Sprocket
- 2 Idler Sprocket Assemblies
- 4 Timing Chain Guides and Tensioners
Technical Specifications
| Fitment | 2012-2015 Chevrolet Impala |
|---|---|
| Engine / Chassis | LFX 3.6L V6 / W-Body / Epsilon II |
| Stock Engine Output | 300-305 hp / 262-264 lb-ft |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
| Replaces OEM Part # | 12600461, 12609258, TKGM10436L |
Compatibility
- 2012-2015 Chevrolet Impala — 3.6L Flex Naturally Aspirated
- 2012-2015 Chevrolet Impala — 3.6L Gas Naturally Aspirated
Frequently Asked Questions & Fitment Warnings
Does this fit the W-Body / Epsilon II Impala?
Yes. This is a direct fit for the 2012-2015 Chevrolet Impala equipped with the LFX 3.6L High Feature V6 engine (manual or automatic). Does not fit 2.4L, 2.8L, or Chrysler 3.6L Pentastar engines.
Will this clear P0008/P0016 codes, and is a water pump included?
Yes, replacing worn chains, guides, tensioners, and sprockets resolves mechanical cam-correlation faults like P0008 and P0016 once timed correctly. A water pump is not included.
What is required for installation?
This is a full front-engine timing service. Installation requires supporting the engine, removing the front cover, aligning timing marks, and torquing fasteners to GM factory specs for 12600461 / 12609258.
The Chevrolet Precision Standard
Engineered to restore factory cam-to-crank synchronization and oil-pressurized tension control across the LFX 3.6L High Feature V6 valvetrain. Complete assembly replacement prevents repeat front-cover teardowns and protects long-term engine reliability.
Passgenauigkeit
Passgenauigkeit
|
Erstellen |
Chevrolet |
|---|---|
|
Hubraum |
|
|
Jahr |
|
Garantie
Garantie
Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

Sicher einkaufen
In unserem Shopify-Store legen wir größten Wert auf Ihre Sicherheit. So gewährleisten wir ein sicheres Einkaufserlebnis:
1. Sichere Transaktionen: Wir verwenden fortschrittliche Verschlüsselung, um Ihre persönlichen Daten und Zahlungsinformationen zu schützen und sicher zu übertragen.
2. Vertrauenswürdige Zahlungs-Gateways: Unser Store ist in vertrauenswürdige Zahlungs-Gateways integriert, um sicherzustellen, dass Ihre Transaktionen sicher und effizient verarbeitet werden.
3. Datenschutz: Ihre Privatsphäre hat bei uns oberste Priorität. Wir befolgen strenge Datenschutzrichtlinien, um Ihre persönlichen Daten vertraulich und sicher zu behandeln.
4. Sichere Plattform: Shopify bietet robuste Sicherheitsfunktionen und eine kontinuierliche Überwachung gegen Schwachstellen, um eine sichere Einkaufsumgebung zu gewährleisten.
5. Verifizierte Händler: Wir sind ein verifizierter Händler auf Shopify und verpflichten uns, authentische und qualitativ hochwertige Produkte anzubieten.
6. Transparente Richtlinien: Unsere klaren Rückgabe-, Rückerstattungs- und Versandrichtlinien geben Ihnen die Gewissheit, dass wir hinter unseren Produkten stehen.
7. Kundensupport: Unser engagiertes Kundensupport-Team steht Ihnen bei allen Anliegen und Fragen gerne zur Verfügung.
Kaufen Sie mit Vertrauen in unserem Shopify-Store ein, wo Ihre Sicherheit und Zufriedenheit unsere obersten Prioritäten sind.
$445.95