Performance Timing Chain Kit for BMW X5 (2007-2017) 3.0L
Die Abholverfügbarkeit konnte nicht geladen werden
- Garantierte Passgenauigkeit
- Leistungsgeprüft
- Lebenslange Garantie
Sie möchten es bald? Bestellen Sie innerhalb von
Sicher einkaufen
Sicherer Bezahlvorgang mit vertrauenswürdigen Zahlungsanbietern.
Direct-Fit Timing Chain & VANOS Kit for 2007-2017 BMW X5 (E70 / F15)
What it Does: This performance timing chain and camshaft adjustment kit restores synchronized crankshaft-to-camshaft mechanical timing and variable valve timing control on the 2007-2017 BMW X5 (E70 / F15) equipped with N52 and N55 3.0L inline-six engines.
The Stock BMW X5 Timing Drive Failure
On high-mileage E70 and F15 models running the N52 or N55 3.0L inline-six, continuous thermal cycling and oil-pressure fluctuations degrade the factory polymer timing chain guides and hydraulic tensioner. As the primary roller chain stretches and VANOS camshaft adjusters wear internally, cam-to-crank phase accuracy drifts outside DME tolerances. This mechanical slack triggers camshaft correlation faults such as P0012, P0015, and P0016, and risks severe piston-to-valve contact if the chain jumps a tooth.
Common Symptoms of a Failing OEM Timing Chain Assembly
- Check Engine Light / VANOS Faults: Stored OBD-II codes including P0012 (intake cam over-retarded), P0015 (exhaust cam over-retarded), or P0016 caused by chain elongation and sluggish adjuster response.
- Cold-Start Metallic Rattle: Audible slapping from the front timing cover during startup before oil pressure stabilizes in a fatigued hydraulic tensioner and worn guide rails.
- Rough Idle & Drivability Loss: Erratic valve timing produces an unstable idle, delayed throttle response, limp-mode activation, or catastrophic valvetrain damage if timing skips.
The Direct-Fit Timing Chain & Adjuster Solution
Manufactured to match factory tolerances for OEM part numbers 11317502180 and 11317584084, this complete timing assembly replaces every primary wear component simultaneously. Precision-machined intake and exhaust camshaft adjustment units maintain accurate oil-pressure-driven cam phasing across the RPM range, while the hardened steel timing chain, sprocket, tensioner, and reinforced composite guide rails eliminate slack. Engineered for factory-location installation on N52 and N55 3.0L engines, it restores proper valve timing geometry without front-cover modification.
What's Included
- 2 Camshaft Adjustment Units (Intake and Exhaust)
- 1 Timing Chain
- 1 Timing Chain Rail and Guide Assembly
- 1 Timing Chain Rail
- 1 Timing Chain Tensioner
- 1 Sprocket
Technical Specifications
| Fitment | 2007-2017 BMW X5 |
|---|---|
| Engine / Chassis | N52 / N55 3.0L I6 / E70, F15 |
| Stock Engine Output | 260–300 hp / 225–300 lb-ft |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
| Replaces OEM Part # | 11317502180, 11317584084 |
Compatibility
- BMW X5 3.0L Gas Naturally Aspirated — 2007-2011
- BMW X5 3.0L Gas Turbocharged — 2011-2017
Frequently Asked Questions & Fitment Warnings
Does this fit the E70 and F15 X5?
Yes. This is a direct fit for the 2007-2017 BMW X5 equipped with the N52 or N55 3.0L inline-six engine. This kit is not listed for 2.0L N20 or 2.5L engines—confirm your exact engine displacement before ordering.
Will this resolve P0012/P0015/P0016 timing faults, and are both VANOS adjusters included?
Yes. Both intake and exhaust camshaft adjustment units are included along with the chain, rails, tensioner, and sprocket to eliminate the mechanical timing drift responsible for P0012, P0015, and P0016 faults once base timing is reset.
Are a water pump and mounting bolts included for installation?
No. This kit includes the timing chain, guides, tensioner, sprocket, and camshaft adjusters only—a water pump and bolt/washer hardware pack are not included. Service requires locking the engine at TDC and torquing fasteners to vehicle specifications.
The BMW Precision Standard
Built to maintain strict European DME timing tolerances, this complete timing drive kit keeps your E70 or F15 X5 running smoothly with CEL-free operation and accurate emissions compliance. Servicing the chain, guides, tensioner, sprocket, and both VANOS units together ensures consistent valvetrain synchronization under sustained thermal load.
Passgenauigkeit
Passgenauigkeit
|
Erstellen |
BMW |
|---|---|
|
Hubraum |
|
|
Jahr |
|
Garantie
Garantie
Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

Sicher einkaufen
In unserem Shopify-Store legen wir größten Wert auf Ihre Sicherheit. So gewährleisten wir ein sicheres Einkaufserlebnis:
1. Sichere Transaktionen: Wir verwenden fortschrittliche Verschlüsselung, um Ihre persönlichen Daten und Zahlungsinformationen zu schützen und sicher zu übertragen.
2. Vertrauenswürdige Zahlungs-Gateways: Unser Store ist in vertrauenswürdige Zahlungs-Gateways integriert, um sicherzustellen, dass Ihre Transaktionen sicher und effizient verarbeitet werden.
3. Datenschutz: Ihre Privatsphäre hat bei uns oberste Priorität. Wir befolgen strenge Datenschutzrichtlinien, um Ihre persönlichen Daten vertraulich und sicher zu behandeln.
4. Sichere Plattform: Shopify bietet robuste Sicherheitsfunktionen und eine kontinuierliche Überwachung gegen Schwachstellen, um eine sichere Einkaufsumgebung zu gewährleisten.
5. Verifizierte Händler: Wir sind ein verifizierter Händler auf Shopify und verpflichten uns, authentische und qualitativ hochwertige Produkte anzubieten.
6. Transparente Richtlinien: Unsere klaren Rückgabe-, Rückerstattungs- und Versandrichtlinien geben Ihnen die Gewissheit, dass wir hinter unseren Produkten stehen.
7. Kundensupport: Unser engagiertes Kundensupport-Team steht Ihnen bei allen Anliegen und Fragen gerne zur Verfügung.
Kaufen Sie mit Vertrauen in unserem Shopify-Store ein, wo Ihre Sicherheit und Zufriedenheit unsere obersten Prioritäten sind.
$418.95