Zum Produktinhalt springen
1 von 6

Performance Timing Chain Kit for BMW 5 Series (2006-2017) 3.0L



Regulärer Preis $418.95
Angebotspreis $418.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

Direct-Fit Performance Timing Chain Kit for 2006-2017 BMW 5 Series (E60 / F10)

What it Does: This Performance Timing Chain Kit synchronizes crankshaft-to-camshaft rotation and restores variable valve timing across N52, N54, and N55 3.0L I6 engines in the 2006–2017 BMW 5 Series (E60 / E61 / F10).

The Stock BMW 5 Series Timing Assembly Failure

On E60 and F10 platforms powered by the N52, N54, or N55 3.0L I6, prolonged thermal cycling and oil degradation fatigue the OEM hydraulic tensioner and brittle composite guide rails. As chain elongation exceeds factory tolerances or internal VANOS phaser vanes wear, cam-to-crank phase accuracy drifts under load. This mechanical slack frequently triggers P0012, P0015, or P0016 correlation fault codes alongside cold-start rattle. Left unaddressed, guide fracture or tooth jump causes catastrophic valve-to-piston interference.

Common Symptoms of a Failing OEM Timing Chain & VANOS Assembly

  • Check Engine Light / VANOS DTCs: Triggers P0012, P0015, or P0016 cam-crank correlation and VANOS actuation faults due to delayed camshaft phasing.
  • Cold-Start Timing Rattle: Audible metallic slapping from the front timing cover before oil pressure builds in a fatigued hydraulic tensioner.
  • Rough Idle & Drivability Loss: Erratic camshaft timing induces misfires, sluggish throttle response, or complete chain jump resulting in severe engine damage.

The Precision-Matched Timing Chain Kit Solution

This direct-fit timing assembly replaces worn factory components matching 11317502180 and 11317584084 specifications for restored valvetrain geometry. Precision-machined intake and exhaust camshaft adjustment units work alongside a high-tensile timing chain, low-friction guide rails, crankshaft sprocket, and calibrated hydraulic tensioner to eliminate chain whip. Engineered to drop directly into factory front-cover mounting points on the E60 / F10 3.0L I6, every component maintains strict cam-to-crank synchronization across high-RPM boosted and naturally aspirated operating conditions.

What's Included

  • 2 Camshaft Adjustment Units (Intake and Exhaust)
  • 1 Timing Chain
  • 1 Timing Chain Rail and Guide Assembly
  • 1 Timing Chain Rail
  • 1 Timing Chain Tensioner
  • 1 Sprocket

Technical Specifications

Fitment 2006-2017 BMW 5 Series
Engine / Chassis N52 / N54 / N55 3.0L I6 / E60, E61, F10
Stock Engine Output 215–300 hp / 185–300 lb-ft
Installation Type Direct-Fit OEM Replacement (Factory Timing Locations)
Replaces OEM Part # 11317502180, 11317584084

Compatibility

  • 2006-2011 BMW 5 Series — 3.0L Gas Naturally Aspirated
  • 2010-2017 BMW 5 Series — 3.0L Gas Turbocharged
  • 2012-2016 BMW 5 Series — 3.0L Hybrid Turbocharged

Frequently Asked Questions & Fitment Warnings

Does this fit the E60 / F10 5 Series?

Yes. This is a direct fit for the 2006-2017 BMW 5 Series equipped with the 3.0L I6 (N52 / N54 / N55) engine. This kit is not compatible with 2.0L N20 or 2.5L engine variants.

Will this resolve VANOS timing codes like P0012 or P0015, and are both adjusters included?

Yes. Both intake and exhaust camshaft adjustment units are included alongside the chain, rails, tensioner, and sprocket to correct P0012, P0015, and P0016 faults caused by stretched chains or fatigued VANOS adjusters.

Does this kit include a water pump or replacement bolt hardware?

No. This is a dedicated timing chain, guide, tensioner, sprocket, and camshaft-adjuster kit only; a water pump and bolt/washer hardware pack are not included and must be sourced separately when locking the engine at TDC and torquing fasteners to factory specs.

The BMW Precision Standard

Built to restore factory timing tolerances and ECU-commanded VANOS accuracy, this complete timing service kit keeps E60 and F10 5 Series engines running CEL-free. Precision-matched components ensure reliable oil-pressure-driven cam phasing and long-term valvetrain durability under daily and spirited driving loads.




Passgenauigkeit

Erstellen

BMW

Hubraum

  • 3.0L

Jahr

  • 2006
  • 2007
  • 2008
  • 2009
  • 2010
  • 2011
  • 2012
  • 2013
  • 2014
  • 2015
  • 2016
  • 2017

Garantie

Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

Performance Timing Chain Kit for BMW 5 Series (2006-2017) 3.0L

$418.95