Zum Produktinhalt springen
1 von 6

PCV Valve Cover Membrane Kit for BMW X4 (2019-2020) 3.0L



Regulärer Preis $40.95
Angebotspreis $40.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

Direct-Fit PCV Valve Cover Membrane Kit for 2019-2020 BMW X4 (G02)

What it Does: This four-piece PCV Valve Cover Membrane Kit restores sealed positive crankcase ventilation on the 2019-2020 BMW X4 (G02) equipped with the B58 3.0L turbocharged inline-six engine without replacing the complete valve cover.

The Stock BMW X4 Crankcase Ventilation Failure

Heat soak and continuous blow-by oil vapor degrade the factory elastomer diaphragm inside the G02 B58 3.0L valve cover over time. Repeated thermal cycling causes the membrane to harden, tear, or collapse against its internal spring, breaking crankcase vacuum regulation. Once ruptured, unmetered air enters the intake tract and disrupts oil separator pressure. This condition commonly triggers P0171 lean mixture codes, P0507 high idle faults, and P052E PCV regulator errors.

Common Symptoms of a Failing OEM PCV Membrane

  • Check Engine Light / DTCs: Unmetered vacuum leaks and erratic crankcase pressure trigger P0171 (System Too Lean), P0507 (Idle Air Control RPM Higher Than Expected), or P0300 misfire faults.
  • Audible Whistle & Rough Idle: A torn diaphragm pulls air past the cap seal, creating a high-pitched squeal from the valve cover and unstable idle control.
  • Oil Ingestion & Excess Pressure: Loss of crankcase vacuum draws oil vapors into the intake tract and places excess pressure on crankshaft seals.

The Direct-Fit Valve Cover PCV Service Solution

Engineered to match OEM 11127645173 and 11 12 1 025 447 geometry, this four-piece kit replaces the cap, membrane, spring, and washer seal as a matched assembly. The oil- and heat-resistant elastomer diaphragm restores consistent crankcase vacuum modulation across idle and boosted operation on the B58 3.0L engine. Direct-fit dimensions allow every component to seat squarely into the factory valve cover housing. Technicians restore sealed PCV operation without replacing the complete valve cover.

What's Included

  • 1 PCV Cap
  • 1 PCV Membrane
  • 1 Spring
  • 1 Washer Seal

Technical Specifications

Fitment 2019-2020 BMW X4
Engine / Chassis B58 3.0L Gas Turbocharged / G02
Stock Engine Output 355–382 hp / 365–368 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 11127645173, 11 12 1 025 447

Compatibility

  • 2019-2020 BMW X4 (G02) — 3.0L Gas Turbocharged (B58)

Frequently Asked Questions & Fitment Warnings

Does this fit the G02 X4?

Yes. This is a direct fit for the 2019-2020 BMW X4 equipped with the B58 3.0L engine. This kit is not compatible with B48 2.0L engines (including 2.0L 530i or 2.0L 740i applications) and is not a complete valve cover assembly.

Will this resolve P0171 vacuum leak codes and valve cover whistling?

Yes, when caused by a torn or collapsed PCV diaphragm. Replacing all four wear components matching OEM 11127645173 and 11 12 1 025 447 restores crankcase vacuum regulation and eliminates unmetered air ingestion.

What does installation require?

Standard hand tools and clean seating prep. Access the PCV cap on the valve cover, remove the worn cap, membrane, spring, and washer seal, thoroughly clean the housing seating surface, and install the four new pieces in factory order.

The BMW Precision Standard

Maintaining exact crankcase vacuum tolerances is critical for stable fuel trims, clean intake tracts, and CEL-free operation on the B58 3.0L platform. Restoring the factory PCV sealing geometry protects engine gaskets and turbocharger oil seals under sustained load.




Passgenauigkeit

Erstellen

BMW

Hubraum

  • 3.0L

Jahr

  • 2019
  • 2020

Garantie

Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

PCV Valve Cover Membrane Kit for BMW X4 (2019-2020) 3.0L

$40.95