Zum Produktinhalt springen
1 von 6

PCV Valve Cover Membrane Kit for BMW 1 Series (2017-2019) 3.0L



Regulärer Preis $40.95
Angebotspreis $40.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

Direct-Fit PCV Valve Cover Membrane Kit for 2017-2019 BMW 1 Series (F20/F21)

What it Does: Restores sealed crankcase ventilation on 2017-2019 BMW 1 Series (F20/F21) B58 3.0L engines without replacing the complete valve cover.

The Stock BMW 1 Series PCV Diaphragm Failure

On the F20/F21 chassis equipped with the B58 3.0L engine, the factory elastomer PCV membrane sits inside the composite valve cover and endures continuous thermal cycling and oil vapor exposure. Over time, under-hood heat soak hardens the rubber diaphragm, causing it to tear or collapse under vacuum. Once ruptured, unmetered air bypasses the MAF sensor and pulls oil vapor into the intake, triggering P0171 and P052E fault codes.

Common Symptoms of a Failing OEM PCV Valve Membrane

  • Check Engine Light & Lean Codes: Triggers P0171, P0507, or P052E from unmetered crankcase vacuum leaks.
  • Valve Cover Whistle & Oil Ingestion: High-pitched squeal with oil vapor entering the intake tract.
  • Rough Idle & Excess Pressure: Unstable idle and elevated crankcase pressure risking seal leaks.

The Direct-Fit Membrane Service Kit Solution

This 4-piece service kit replaces the worn factory cap, diaphragm, calibrated spring, and washer seal at the valve cover port, matching OE numbers 11127645173 and 11 12 1 025 447. Molded from oil-resistant elastomer, the new membrane restores accurate crankcase vacuum regulation on the B58 3.0L engine. Servicing just the PCV internals avoids full valve cover replacement. Remove the old parts, clean the seating surface, and install directly in factory order.

What's Included

  • 1x PCV Cap
  • 1x PCV Membrane
  • 1x Spring
  • 1x Washer Seal

Technical Specifications

Fitment 2017-2019 BMW 1 Series
Engine / Chassis B58 3.0L I6 Turbo / F20, F21
Stock Engine Output 335 hp / 369 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 11127645173, 11 12 1 025 447

Compatibility

  • 2017-2019 BMW 1 Series — 3.0L Gas Turbocharged (B58)

Frequently Asked Questions & Fitment Warnings

Does this fit the F20/F21 1 Series?

Yes. Direct fit for 2017-2019 BMW 1 Series with the B58 3.0L engine. Excludes B48 2.0L engines (such as 2.0L 530i or 2.0L 740i).

Is this a complete valve cover, and does it fix P0171/P052E?

No, this is a service kit only. Replacing the torn membrane restores sealed crankcase vacuum to resolve whistle noise, rough idle, and P0171/P052E codes.

How many pieces are included and what prep is needed?

Four pieces: cap, membrane, spring, and washer seal. Remove the failed components, clean the seating surface, and install in factory order.

The BMW Precision Standard

Engineered to restore factory crankcase vacuum on F20/F21 platforms, maintaining B58 3.0L ECU fuel-trim accuracy and CEL-free operation without replacing the complete valve cover.




Passgenauigkeit

Erstellen

BMW

Hubraum

  • 3.0L

Jahr

  • 2017
  • 2018
  • 2019

Garantie

Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

PCV Valve Cover Membrane Kit for BMW 1 Series (2017-2019) 3.0L

$40.95