Zum Produktinhalt springen
1 von 5

O2 Oxygen Sensor Upstream Downstream for Toyota Tacoma (2016-2020) 3.5L



Regulärer Preis $221.95
Angebotspreis $221.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Oxygen Sensor Kit for 2016-2020 Toyota Tacoma (N300)

What it Does: This 4-piece oxygen sensor kit monitors pre- and post-catalyst exhaust gases on the 2016-2020 Toyota Tacoma (N300) 2GR-FKS 3.5L V6 to maintain closed-loop fuel trims and catalyst efficiency.

The Stock Toyota Tacoma Sensor Degradation

Factory oxygen sensors on the N300 platform endure severe thermal cycling, exhaust condensation, and carbon fouling on the 2GR-FKS 3.5L V6. Over time, zirconia sensing elements suffer thermal shock fracture while internal heater circuits burn open, delaying closed-loop fuel control. Sluggish upstream response skews air-fuel ratios, while contaminated downstream sensors misread catalyst efficiency and trigger persistent P0135, P0138, or P0420/P0430 codes.

Common Symptoms of Failing OEM Oxygen Sensors

  • Check Engine Light: Codes like P0135, P0155, or P0138 trigger when heater resistance spikes or voltage stalls.
  • Skewed Fuel Trims: Carbon-fouled tips cause rich or lean fuel drift, rough idle, and hesitation.
  • Reduced MPG: Delayed closed-loop operation forces rich open-loop fueling and causes failed emissions tests.

The Direct-Fit 4-Sensor O2 Kit Solution

Replacing all four Bank 1 and Bank 2 positions as a matched set restores balanced ECM feedback across the 2GR-FKS 3.5L V6. Each sensor features laser-welded stainless steel housings, dual-layer porous PTFE shields, and fast-acting planar heaters for rapid light-off. Built to match OEM 234-9140 electrical specs and thread geometry, the pre-terminated harnesses plug directly into factory connectors without cutting or splicing.

What's Included

  • 2 Upstream Oxygen Sensors
  • 2 Downstream Oxygen Sensors

Technical Specifications

Fitment 2016-2020 Toyota Tacoma
Engine / Chassis 2GR-FKS 3.5L V6 / N300
Emissions & Sensor Spec 4-Wire Heated Air-Fuel (Upstream) & Zirconia O2 (Downstream)
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 234-9140

Compatibility

  • 2016-2020 Toyota Tacoma 3.5L V6 (Confirm engine before ordering)

Frequently Asked Questions & Fitment Warnings

Does this fit the N300 Tacoma?

Yes. Direct fit for the 2016-2020 Toyota Tacoma equipped with the 2GR-FKS 3.5L V6 engine. Excludes 2TR-FE 2.7L 4-cylinder models; confirm engine before ordering.

Will this clear P0135 or P0155 heater circuit codes?

Yes, when caused by faulty sensor heaters. Replacing all four units restores ECM continuity and clears P0135, P0155, P0138, and P0158 codes.

Is wire splicing required during installation?

No. Each sensor uses OEM-style locking plugs for direct installation; lightly coat threads with anti-seize if needed, avoiding the tip.

The Toyota Heavy-Duty Standard

Built to endure sustained exhaust heat during towing and off-road use on the N300 Tacoma, keeping fuel trims precise.




Passgenauigkeit

Erstellen

Toyota

Hubraum

  • 3.5L

Jahr

  • 2016
  • 2017
  • 2018
  • 2019
  • 2020

Garantie

Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

O2 Oxygen Sensor Upstream Downstream for Toyota Tacoma (2016-2020) 3.5L

$221.95