Zum Produktinhalt springen
1 von 3

O2 Oxygen Sensor Upstream Downstream for Toyota Tacoma (2016-2020) 2.7L



Regulärer Preis $51.95
Angebotspreis $51.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Sensor Kit for 2016-2020 Toyota Tacoma (N300)

What it Does: This matched upstream and downstream oxygen sensor kit monitors pre- and post-catalyst exhaust oxygen levels on the N300 Toyota Tacoma 2TR-FE 2.7L I4 for accurate fuel trim and emissions control.

The Stock Toyota Tacoma Sensor Degradation

Over high mileage, factory oxygen sensors on the N300 chassis with the 2TR-FE 2.7L I4 suffer thermal cycling fatigue, carbon fouling, and internal heater burnout. Moisture intrusion and ash poisoning coat the zirconia element, slowing voltage response and skewing closed-loop fuel trim calculations. When upstream or downstream heater circuits fail, the ECM triggers persistent fault codes like P0031, P0138, or P0141 and forces rich open-loop fueling.

Common Symptoms of Failing OEM Oxygen Sensors

  • Check Engine Light / DTCs: Triggers P0031, P0136, P0138, or P0141 when heater resistance spikes or voltage stalls.
  • Fuel Trim Drift & Hesitation: Lazy upstream switching causes throttle stumble and P0171 lean corrections.
  • Poor MPG & Emissions Failure: Open-loop over-fueling fouls plugs, overheats the catalyst, and fails OBD-II readiness.

The Direct-Fit O2 Sensor Solution

Replacing both sensors as a matched set restores synchronized pre- and post-catalyst feedback across the 2TR-FE 2.7L I4 exhaust stream. Built to OEM 234-8001 and 234-9161 specifications, each direct-fit sensor features a corrosion-resistant stainless housing, laser-welded protective shield, and fast-light-off ceramic heater element. Factory-length shielded harnesses and keyed OE-style weatherproof connectors eliminate wire splicing, delivering accurate millivolt and current signaling with direct threaded bung installation.

What's Included

  • 1 Upstream Oxygen Sensor
  • 1 Downstream Oxygen Sensor

Technical Specifications

Fitment 2016-2020 Toyota Tacoma
Engine / Chassis 2TR-FE 2.7L I4 / N300
Sensor Architecture Direct-Fit Heated Upstream & Downstream O2 Set
Installation Type Direct Bolt-On OEM Replacement (Plug-and-Play)
Replaces OEM Part # 234-8001, 234-9161, 2348001, 2349161

Compatibility

  • 2016-2020 Toyota Tacoma 2.7L

Frequently Asked Questions & Fitment Warnings

Does this fit the N300 Tacoma?

Yes. This is a direct fit for the 2016-2020 Toyota Tacoma equipped with the 2TR-FE 2.7L I4 engine. Excludes 3.5L V6 models; confirm engine before ordering.

Will this clear P0031 or P0138 codes, and are both sensors included?

Yes. Both upstream and downstream sensors are included to clear sensor-induced P0031, P0138, and P0141 codes when wiring is intact.

Is splicing or special prep needed for installation?

No. Factory connectors plug straight in; thread into clean bungs, torque to spec, and reset codes.

The Toyota Heavy-Duty Standard

Built for work-truck thermal durability, this sensor kit keeps your N300 Tacoma at peak closed-loop efficiency during towing and hauling, protecting the catalyst for CEL-free operation.




Passgenauigkeit

Erstellen

Toyota

Hubraum

  • 2.7L

Jahr

  • 2016
  • 2017
  • 2018
  • 2019
  • 2020

Garantie

Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

O2 Oxygen Sensor Upstream Downstream for Toyota Tacoma (2016-2020) 2.7L

$51.95