Zum Produktinhalt springen
1 von 5

O2 Oxygen Sensor Upstream Downstream for Toyota FJ Cruiser (2007-2009) 4.0L



Regulärer Preis $62.95
Angebotspreis $62.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Oxygen Sensor Kit for 2007-2009 Toyota FJ Cruiser (GSJ10/GSJ15)

What it Does: This matched four-sensor kit monitors pre- and post-catalyst exhaust gases on the 2007-2009 Toyota FJ Cruiser (GSJ10/GSJ15, 1GR-FE 4.0L V6) to regulate fuel trim and catalyst efficiency.

The Stock Toyota FJ Cruiser Sensor Failure

Over extended mileage, the factory upstream air-fuel ratio and downstream zirconia sensors on the GSJ10/GSJ15 equipped with the 1GR-FE 4.0L V6 suffer thermal cycling fatigue and internal heater element burnout. Carbon fouling and silica contamination coat the porous ceramic sensing element, slowing voltage switching response and skewing closed-loop ECM fuel trims. Replacing only one degraded sensor frequently triggers opposing-bank fault codes like P0135, P0155, or P0420/P0430.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Heater & Efficiency DTCs: Triggers P0135, P0155, or P0420/P0430 from open heaters or slow switching.
  • Hesitation & Rough Idle: Delayed fuel trim feedback causes surging and uneven idle under load.
  • Poor MPG & Smog Failure: Open-loop enrichment raises fuel consumption and tailpipe emissions.

The Direct-Fit Matched O2 Sensor Solution

This matched four-sensor kit replaces both upstream and downstream positions simultaneously to restore balanced bank-to-bank lambda feedback on the 1GR-FE 4.0L V6. Each unit combines a laser-welded stainless steel body, fast-acting ceramic sensing element, and OE-spec heater resistance to withstand extreme exhaust heat soak. Pre-configured OEM weatherproof connectors and factory-spec threads bolt directly into stock exhaust bungs with zero wire splicing required.

What's Included

  • 2 Upstream Oxygen Sensors
  • 2 Downstream Oxygen Sensors

Technical Specifications

Fitment 2007-2009 Toyota FJ Cruiser
Engine / Chassis 1GR-FE 4.0L V6 / GSJ10, GSJ15
Stock Engine Output 239 hp / 278 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # G836237SIN

Compatibility

  • 2007-2009 Toyota FJ Cruiser 4.0L (GSJ10/GSJ15)

Frequently Asked Questions & Fitment Warnings

Does this fit the GSJ10/GSJ15 FJ Cruiser?

Yes. Fits 2007-2009 FJ Cruiser models with the 1GR-FE 4.0L V6. Excludes 2010+ Dual VVT-i models; confirm engine before ordering.

Will this clear P0135, P0155, or P0420/P0430 codes?

Yes, if sensor-related. Replacing all four sensors fixes heater faults (P0135/P0155); persistent P0420/P0430 codes indicate a failing catalytic converter.

Are connectors plug-and-play without wire splicing?

Yes. Direct-fit OEM connectors bolt into stock GSJ10/GSJ15 bungs using a 22mm O2 socket with zero splicing.

The Toyota Heavy-Duty Standard

Built for trail durability and sustained thermal load, this kit keeps your GSJ10/GSJ15 FJ Cruiser running clean on steep grades. Restore crisp fuel metering and CEL-free operation.




Passgenauigkeit

Erstellen

Toyota

Hubraum

  • 4.0L

Jahr

  • 2007
  • 2008
  • 2009

Garantie

Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

O2 Oxygen Sensor Upstream Downstream for Toyota FJ Cruiser (2007-2009) 4.0L

$62.95