Zum Produktinhalt springen
1 von 5

O2 Oxygen Sensor Upstream Downstream for Toyota Echo (2003-2005) 1.5L



Regulärer Preis $34.95
Angebotspreis $34.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Oxygen Sensor Kit for 2003-2005 Toyota Echo (XP10)

What it Does: This 2-piece upstream and downstream O2 sensor kit restores closed-loop fuel trim and catalyst monitoring on the 2003-2005 Toyota Echo (XP10) 1NZ-FE 1.5L.

The Stock Toyota Echo O2 Sensor Failure

On the XP10 Echo with the 1NZ-FE 1.5L engine, factory O2 sensors endure severe exhaust heat cycles and carbon buildup. Over time, internal heater circuits fail and zirconia elements suffer thermal shock or contamination, slowing voltage switching between lean and rich states. Biased feedback disrupts ECU short-term fuel trims and triggers fault codes like P0133, P0135, P0141, or P0420. Left unresolved, sluggish sensor response compromises catalytic converter health.

Common Symptoms of a Failing OEM O2 Sensor

  • Check Engine Light / DTCs: Heater or response codes like P0135, P0141, P0133, or P0171.
  • Rough Idle & Hesitation: Delayed closed-loop fuel trim corrections causing uneven throttle response.
  • Failed Emissions & High MPG: Incomplete readiness monitors and rich-running trims increasing fuel consumption.

The Direct-Fit Heated Zirconia O2 Solution

Replacing both sensors as a matched pair restores synchronized exhaust telemetry on the 1NZ-FE 1.5L. Each unit features a laser-welded stainless housing, protected zirconia sensing element, and direct-fit OE connector requiring zero wire splicing. Fast heater warm-up stabilizes stoichiometric fuel delivery upstream, while the downstream sensor monitors converter efficiency to set OBD-II readiness monitors reliably. Installing both prevents leaving an aged partner sensor active on the engine.

What's Included

  • 1 Upstream Oxygen Sensor
  • 1 Downstream Oxygen Sensor

Technical Specifications

Fitment 2003-2005 Toyota Echo
Engine / Chassis 1NZ-FE 1.5L / XP10
Emissions & Sensor Spec Direct-Fit Heated Zirconia / Pre- & Post-Cat
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # AP83190500Y

Compatibility

  • 2003-2005 Toyota Echo 1.5L (XP10 / 1NZ-FE)

Frequently Asked Questions & Fitment Warnings

Does this fit the XP10 Echo?

Yes. Direct fit for the 2003-2005 Toyota Echo 1NZ-FE 1.5L. Confirm year, engine, and connector style; excluded from other years or engines.

Will this clear P0135/P0141 codes and set readiness monitors?

Yes. Replacing both sensors fixes heater and bias faults like P0135/P0141, allowing readiness monitors to set after a drive cycle.

Are splices needed, and what install prep is required?

No splicing needed. Keep grease and anti-seize off the tip, hand-thread before torquing, and clear stored codes.

The Toyota Precision Standard

Built to OEM feedback tolerances for the XP10 platform, this matched sensor kit restores crisp throttle response and clean closed-loop control. It keeps your 1NZ-FE 1.5L emissions-compliant and fuel-efficient.




Passgenauigkeit

Erstellen

Toyota

Hubraum

  • 1.5L

Jahr

  • 2003
  • 2004
  • 2005

Garantie

Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

O2 Oxygen Sensor Upstream Downstream for Toyota Echo (2003-2005) 1.5L

$34.95