Zum Produktinhalt springen
1 von 5

O2 Oxygen Sensor Upstream Downstream for Oldsmobile Bravada (1996-1999) 4.3L



Regulärer Preis $82.95
Angebotspreis $82.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Sensor Kit for 1996-1999 Oldsmobile Bravada (GMT330)

What it Does: This four-piece oxygen sensor kit monitors pre- and post-catalyst exhaust oxygen levels on the 1996-1999 Oldsmobile Bravada GMT330 L35 4.3L V6 to regulate closed-loop fuel trims and verify catalyst efficiency.

The Stock Oldsmobile Bravada Sensor Failure

Factory oxygen sensors on the GMT330 Bravada with the L35 4.3L Vortec V6 endure extreme thermal cycling in the exhaust manifolds and Y-pipe. Exhaust soot, silicone contamination, and moisture degrade the internal zirconia ceramic tip while burning out the 12V heater circuit. As voltage switching slows, the PCM drops out of closed-loop fuel control and logs P0133, P0135, or P0141 fault codes.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / Heater DTCs: Codes like P0135, P0141, P0155, and P0133 signal open internal heater circuits or sluggish voltage transitions.
  • Rich Fuel Trim & Fouling: Lazy upstream feedback skews fuel delivery, causing P0172/P0175 rich conditions, fouled plugs, and poor fuel economy.
  • Emissions Readiness Failures: Degraded downstream sensors trigger false P0420 catalyst efficiency faults and prevent OBD-II emissions monitors from setting.

The Direct-Fit Zirconia Oxygen Sensor Solution

Replacing all four sensors as a matched set restores synchronized signal feedback across both upstream banks and downstream catalyst monitors. Each sensor uses a fast-light-off yttria-stabilized zirconia element inside a laser-welded stainless steel housing to withstand exhaust heat soak and vibration. Factory-length shielded harnesses with OEM weatherpack connectors eliminate wire splicing, while anti-seize coated threads prevent galling in exhaust bungs.

What's Included

  • 2 Upstream Oxygen Sensors
  • 2 Downstream Oxygen Sensors

Technical Specifications

Fitment 1996-1999 Oldsmobile Bravada
Engine / Chassis L35 4.3L V6 / GMT330
Emissions & Substrate OBD-II Heated 4-Wire Zirconia Ceramic Element
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 234-4012, 21006, 24626, 13026, 13423, 15637, 15703, 25165313, 25312184, 25312188, 25312200, 25315809

Compatibility

  • 1996-1999 Oldsmobile Bravada 4.3L

Frequently Asked Questions & Fitment Warnings

Does this fit the GMT330 Bravada?

Yes. This kit is a direct fit for the 1996-1999 Oldsmobile Bravada equipped with the L35 4.3L V6 engine. Excludes 2000-2001 Bravada and 2002+ GMT360 4.2L I6 models; confirm engine before ordering.

Will this clear P0135, P0141, or fuel trim codes?

Yes. Replacing failed sensors resolves P0135/P0141 heater faults and slow-response codes once cleared, allowing the PCM to restore closed-loop fuel control.

Are wire splices required for installation?

No. All four sensors feature direct-fit OEM connectors matching 25312184 and 25312200 harnesses; simply chase rusted bung threads and torque to spec.

The Oldsmobile Heavy-Duty Standard

Engineered for thermal endurance under towing and daily driving loads, this matched sensor kit maintains precise air-fuel ratios across the GMT330 exhaust system. Consistent closed-loop feedback protects the catalytic converters and prevents drivability loss.




Passgenauigkeit

Erstellen

Oldsmobile

Hubraum

  • 4.3L

Jahr

  • 1996
  • 1997
  • 1998
  • 1999

Garantie

Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

O2 Oxygen Sensor Upstream Downstream for Oldsmobile Bravada (1996-1999) 4.3L

$82.95