Zum Produktinhalt springen
1 von 5

O2 Oxygen Sensor Upstream Downstream for Mini Cooper (2013-2015) 1.6L



Regulärer Preis $43.95
Angebotspreis $43.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Sensor Kit for 2013-2015 Mini Cooper (R56/R60)

What it Does: This matched upstream and downstream oxygen sensor kit monitors pre- and post-cat exhaust oxygen on the 2013-2015 Mini Cooper 1.6L (N16/N18) to regulate air-fuel stoichiometry.

The Stock Mini Cooper Sensor Failure

Factory oxygen sensors on the R56 / R57 / R60 chassis equipped with the N16 / N18 1.6L engine endure extreme exhaust heat and thermal cycling. Over time, internal heater resistance spikes, carbon or oil fouling coats the zirconia ceramic tip, and vibration fractures internal leads. As switching slows, the DME loses closed-loop lambda control, triggering P0130, P0135, P0141, or P0420 codes and rich limp-mode fueling.

Common Symptoms of a Failing OEM Sensor

  • Check Engine Light / DTCs: Fault codes P0130, P0135, P0141, or P0420 trigger from burned-out heaters or sluggish voltage switching.
  • Rough Idle & Rich Fueling: Contaminated sensing tips skew fuel trims, causing hesitation, misfires, and black exhaust soot.
  • Failed Emissions Readiness: Open-loop enrichment drops fuel economy and causes automatic OBD-II emissions test failures.

The Direct-Fit Upstream & Downstream Sensor Solution

Built to replace OEM parts 234-4488 and 234-4686, this matched kit restores rapid closed-loop feedback at both pre-cat and post-cat bungs. Each unit features a laser-welded stainless protective shell, high-density zirconia ceramic core, and low-resistance internal heater for fast light-off. Factory-keyed weather-pack connectors and OE-length harnesses deliver plug-and-play installation with zero wire splicing.

What's Included

  • 1 Upstream Oxygen Sensor
  • 1 Downstream Oxygen Sensor

Technical Specifications

Fitment 2013-2015 Mini Cooper
Engine / Chassis 1.6L (N16 / N18) / R56, R57, R60
Emissions & Sensor Element Zirconia Ceramic Heated Element (EPA Compliant)
Installation Type Direct Plug-and-Play OEM Replacement
Replaces OEM Part # 234-4488, 234-4686

Compatibility

  • 2013-2015 Mini Cooper 1.6L (Confirm 1.6L engine before ordering)

Frequently Asked Questions & Fitment Warnings

Does this fit the R56/R60 Cooper?

Yes. This fits 2013-2015 Mini Cooper models with the 1.6L (N16/N18) engine. Excludes 2014-2015 F56/F55 models equipped with 1.5L (B38) or 2.0L (B48) engines.

Will this clear P0135, P0141, or P0420 codes?

Yes, if sensor-related. Replacing both 234-4686 and 234-4488 resolves heater and switching faults; clear DME codes and inspect the catalyst if P0420 returns.

Is wire splicing required for installation?

No. Both sensors include factory-keyed plugs for direct bolt-in installation into clean M18x1.5 exhaust bungs.

The Mini Cooper Euro Precision Standard

European DME systems require exact lambda voltage accuracy for clean emissions and CEL-free drivability. Replacing both upstream and downstream sensors together restores factory fuel trim balance.




Passgenauigkeit

Erstellen

Mini Cooper

Hubraum

  • 1.6L

Jahr

  • 2013
  • 2014
  • 2015

Garantie

Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

O2 Oxygen Sensor Upstream Downstream for Mini Cooper (2013-2015) 1.6L

$43.95