Zum Produktinhalt springen
1 von 5

O2 Oxygen Sensor Upstream Downstream for Lincoln MKT (2016-2018) 3.7L



Regulärer Preis $134.95
Angebotspreis $134.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

Direct-Fit O2 Oxygen Sensor Kit for 2016-2018 Lincoln MKT (D4)

What it Does: This 4-piece upstream and downstream O2 sensor kit monitors exhaust air-fuel ratios and catalyst efficiency on the 2016-2018 Lincoln MKT (D4) 3.7L Ti-VCT Cyclone V6.

The Stock Lincoln MKT O2 Sensor Failure

Over high mileage, thermal cycling and exhaust soot contaminate the zirconia sensing element inside factory oxygen sensors on the D4 platform with the 3.7L Ti-VCT Cyclone V6. Oil blow-by or rich mixtures foul the platinum electrodes, causing sluggish voltage switching and skewed fuel trims. Internal heater burnout also triggers P0135 or P0155 faults, while biased downstream readings induce P0420/P0430 codes.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light: Triggers heater, response, or catalyst codes like P0135, P0155, and P0420/P0430.
  • Poor Fuel Economy: Corrupted upstream wideband signals force default open-loop fueling, increasing fuel consumption and exhaust soot.
  • Rough Idle & Failed Emissions: Delayed closed-loop transitions cause throttle hesitation, unstable idle, and failed emissions inspections.

The Direct-Fit 4-Sensor Solution

Replacing all four sensors simultaneously restores balanced bank-to-bank air-fuel monitoring across the 3.7L Ti-VCT Cyclone V6. Each unit utilizes a ceramic zirconia sensing core, stainless steel protective shield, and calibrated internal heater for rapid light-off. Pre-terminated OEM connectors and factory-length harnesses match 234-5175, 234-5176, and 234-4966 specifications, threading directly into factory exhaust bungs without cutting or splicing.

What's Included

  • 2 Upstream Oxygen Sensors
  • 2 Downstream Oxygen Sensors

Technical Specifications

Fitment 2016-2018 Lincoln MKT
Engine / Chassis 3.7L Ti-VCT Cyclone V6 / D4
Stock Engine Output 303 hp / 278 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 234-5175, 234-5176, 234-4966

Compatibility

  • 2016-2018 Lincoln MKT 3.7L

Frequently Asked Questions & Fitment Warnings

Does this fit the D4 MKT?

Yes. This is a direct fit for the 2016-2018 Lincoln MKT equipped with the 3.7L Ti-VCT Cyclone V6 engine. Excludes 3.5L EcoBoost models; confirm engine before ordering.

Will this clear P0135 or P0420/P0430 codes?

Yes, if sensor-related. Fresh 234-5175, 234-5176, and 234-4966 sensors restore voltage switching and heater resistance after resetting codes, provided catalysts and exhaust gaskets are intact.

Is splicing required during installation?

No. Each sensor includes direct-fit OEM connectors for plug-and-play installation into stock exhaust bungs.

The Lincoln Precision Standard

Engineered for closed-loop ECU precision and CEL-free operation on the D4 platform, preserving factory emissions compliance and V6 drivability.




Passgenauigkeit

Erstellen

Lincoln

Hubraum

  • 3.7L

Jahr

  • 2016
  • 2017
  • 2018

Garantie

Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

O2 Oxygen Sensor Upstream Downstream for Lincoln MKT (2016-2018) 3.7L

$134.95