Zum Produktinhalt springen
1 von 5

O2 Oxygen Sensor Upstream Downstream for Infiniti Q50 (2016-2022) 3.0L



Regulärer Preis $133.95
Angebotspreis $133.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Oxygen Sensor Kit for 2016-2022 Infiniti Q50 (V37)

What it Does: This matched 4-piece oxygen sensor kit monitors pre- and post-catalyst exhaust oxygen on the 2016-2022 Infiniti Q50 (V37) VR30DDTT 3.0L to maintain closed-loop air-fuel precision and verify catalyst efficiency.

The Stock Infiniti Q50 Sensor Failure

On the twin-turbocharged V37 chassis powered by the VR30DDTT 3.0L engine, factory oxygen sensors endure extreme exhaust temperatures directly downstream of the turbos. Over time, carbon fouling and thermal shock fracture the zirconia element or burn out the internal heater circuit. Once response latency slows, the ECU loses closed-loop fuel trim control and triggers persistent codes such as P0131, P0151, P0030, or P0420/P0430.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Triggers P0131, P0151, heater circuit P0030, or false P0420/P0430 faults.
  • Erratic Fuel Trims: Sluggish switching causes rich or lean spikes, rough idle, and hesitation under boost.
  • Poor Fuel Economy: Default open-loop fueling increases consumption and risks failed emissions inspections.

The Direct-Fit Planar Zirconia Sensor Solution

Designed to restore ECU feedback across Bank 1 and Bank 2, this four-sensor kit replaces OEM numbers 234-9157 and 234-8026 with matched upstream and downstream sensors. Each unit uses a fast-light-off planar zirconia element inside a laser-welded stainless housing to resist moisture and heat soak. Factory-length harnesses and keyed OEM connectors ensure direct plug-and-play installation without cutting or splicing.

What's Included

  • 2 Upstream Oxygen Sensors
  • 2 Downstream Oxygen Sensors

Technical Specifications

Fitment 2016-2022 Infiniti Q50
Engine / Chassis VR30DDTT 3.0L / V37
Emissions & Sensing Type Planar Zirconia Heated / Direct-Fit OEM
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 234-9157, 234-8026

Compatibility

  • 2016-2022 Infiniti Q50 3.0L (Confirm engine before ordering)

Frequently Asked Questions & Fitment Warnings

Does this fit the V37 Q50?

Yes. This is a direct fit for the 2016-2022 Infiniti Q50 equipped with the VR30DDTT 3.0L engine. Excludes 2.0L, 3.7L, and 3.5L Hybrid models.

Will this clear P0131, P0151, or P0030 codes across both banks?

Yes. Replacing all four sensors restores Bank 1 and Bank 2 feedback to clear sensor-induced P0131, P0151, and P0030 codes when wiring and catalysts are intact.

Are these sensors plug-and-play without splicing?

Yes. All four sensors include factory OEM connectors for direct installation without splicing.

The Infiniti Performance Standard

Built for the twin-turbo VR30DDTT exhaust stream, this matched sensor kit restores crisp throttle response and accurate closed-loop air-fuel metering on your V37 Q50.




Passgenauigkeit

Erstellen

Infiniti

Hubraum

  • 3.0L

Jahr

  • 2016
  • 2017
  • 2018
  • 2019
  • 2020
  • 2021
  • 2022

Garantie

Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

O2 Oxygen Sensor Upstream Downstream for Infiniti Q50 (2016-2022) 3.0L

$133.95