Zum Produktinhalt springen
1 von 5

O2 Oxygen Sensor Upstream Downstream for Ford Windstar (2001-2003) 3.8L



Regulärer Preis $55.95
Angebotspreis $55.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Sensor Kit for 2001-2003 Ford Windstar (WIN126)

What it Does: This 4-piece oxygen sensor kit monitors exhaust air-fuel ratios and catalyst efficiency on 2001-2003 Ford Windstar (WIN126) 3.8L Essex V6 models for accurate closed-loop fueling.

The Stock Ford Windstar Sensor Failure

On the WIN126 chassis equipped with the 3.8L Essex V6, factory narrowband oxygen sensors endure severe exhaust heat cycles, carbon fouling, and silicone contamination from aging intake gaskets. Over time, internal zirconia elements lose voltage switching speed while heater circuits open under thermal stress. This causes the PCM to default to open-loop fueling or skew bank-to-bank fuel trims, triggering P0135, P0155, P0171, and P0420 fault codes.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Triggers P0135, P0155, P0171, or P0420 from open heater circuits or lazy voltage switching.
  • Rough Idle & Rich Exhaust: Slow sensor feedback causes over-fueling and noticeable unburned fuel odor.
  • Failed Emissions & Poor MPG: Skewed air-fuel trim increases tailpipe hydrocarbons and reduces fuel economy.

The Direct-Fit Heated Zirconia O2 Sensor Solution

This matched 4-sensor kit replaces both Bank 1 and Bank 2 upstream and downstream positions on the 3.8L Essex V6 without splicing factory harnesses. Each sensor features a laser-welded stainless steel body, protective ceramic shield, and fast-acting heater element for rapid closed-loop activation. Replacing all four units simultaneously balances switching rates across both banks while matching OEM PT8361331AM plug-and-play fitment.

What's Included

  • 2x Upstream Oxygen Sensors
  • 2x Downstream Oxygen Sensors

Technical Specifications

Fitment 2001-2003 Ford Windstar
Engine / Chassis 3.8L Essex V6 / WIN126
Emissions & Sensor Architecture Direct-Fit Heated Zirconia / Upstream & Downstream
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # PT8361331AM

Compatibility

  • 2001-2003 Ford Windstar 3.8L V6

Frequently Asked Questions & Fitment Warnings

Does this fit the WIN126 Windstar?

Yes. Direct fit for 2001-2003 Ford Windstar 3.8L Essex V6 models. Confirm 3.8L engine before ordering; 1995-1998 WIN88 and 3.0L engines are excluded.

Will this clear P0135 or P0420 codes?

Yes, when sensors are at fault. Replacing sluggish units clears P0135/P0155 heater codes; persistent P0420 codes indicate catalyst wear.

Are factory-style connectors included?

Yes. Direct-fit plugs connect straight to factory harnesses without splicing; torque sensors into clean bungs and clear PCM codes.

The Ford Precision Standard

Engineered for dependable daily operation, this matched sensor set restores factory emissions compliance and fuel precision on high-mileage WIN126 vans for steady, CEL-free driving.




Passgenauigkeit

Erstellen

Ford

Hubraum

  • 3.8L

Jahr

  • 2001
  • 2002
  • 2003

Garantie

Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

O2 Oxygen Sensor Upstream Downstream for Ford Windstar (2001-2003) 3.8L

$55.95