Zum Produktinhalt springen
1 von 2

O2 Oxygen Sensor Upstream Downstream for Ford Focus (2000-2004) 2.0L



Regulärer Preis $70.95
Angebotspreis $70.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Sensor Kit for 2000-2004 Ford Focus (C170)

What it Does: This matched upstream and downstream oxygen sensor kit monitors exhaust gas oxygen concentration on the 2000-2004 Ford Focus C170 equipped with the 2.0L engine to regulate closed-loop fuel trims and verify catalyst efficiency.

The Stock Ford Focus Sensor Failure

Over high mileage on the C170 platform, factory 2.0L Split-Port and 2.0L Zetec oxygen sensors suffer from thermal cycling fatigue, silicon contamination, and internal heater burnout. Carbon fouling coats the zirconia sensing thimble, slowing voltage switching between rich and lean states and skewing PCM fuel calculations. Degraded heater circuits spike resistance and trigger P0135, P0141, or slow-response P0133 fault codes while forcing rich open-loop operation.

Common Symptoms of a Failing OEM O2 Sensor

  • Check Engine Light / DTCs: Active P0135, P0141, P0133, or P0171 fault codes stored in the PCM.
  • Poor Fuel Economy: Lazy zirconia response locks fuel trims rich, causing foul exhaust odors and black soot.
  • Drivability & Emissions Failure: Rough cold idle, throttle hesitation, and failed OBD-II emissions readiness.

The Direct-Fit Heated Zirconia Solution

Replacing both Bank 1 Sensor 1 and Bank 1 Sensor 2 simultaneously eliminates mismatched signal latency across the C170 exhaust stream. Each sensor pairs a fast-light-off heater element with a laser-welded stainless steel shield over its zirconia ceramic core to resist thermal shock and moisture intrusion. Factory-length harnesses and direct-fit OEM connectors plug straight into the 2.0L loom without splicing, restoring 11171843 and 15717 signal specifications.

What's Included

  • 1 Upstream Oxygen Sensor
  • 1 Downstream Oxygen Sensor

Technical Specifications

Fitment 2000-2004 Ford Focus
Engine / Chassis 2.0L Split-Port & 2.0L Zetec / C170
Emissions & Sensor Spec EPA Federal Compliant / Heated Zirconia Ceramic Element
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 11171843, 15717

Compatibility

  • 2000-2004 Ford Focus 2.0L (Confirm engine before ordering)

Frequently Asked Questions & Fitment Warnings

Does this fit the C170 Focus?

Yes. This is a direct fit for the 2000-2004 Ford Focus (C170) equipped with the 2.0L engine. Excludes 2.3L Duratec PZEV models; confirm your 2.0L engine configuration before ordering.

Will this clear P0135 and P0141 codes?

Yes, when caused by faulty sensors. Matched units restore P0135 and P0141 heater circuit resistance and rapid closed-loop switching, though persistent P0420 codes indicate catalytic converter degradation.

Is wire splicing required for installation?

No. Direct-fit OEM connectors allow plug-and-play installation. Apply O2-safe anti-seize only to the threads—never the sensing tip—and torque to specification.

The Ford Precision Standard

Accurate exhaust telemetry keeps 2.0L C170 Focus engines running at stoichiometric efficiency with crisp throttle response. Replacing both sensors as a matched set prevents fuel trim drift and maintains CEL-free emissions compliance.




Passgenauigkeit

Erstellen

Ford

Hubraum

  • 2.0L

Jahr

  • 2000
  • 2001
  • 2002
  • 2003
  • 2004

Garantie

Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

O2 Oxygen Sensor Upstream Downstream for Ford Focus (2000-2004) 2.0L

$70.95