Zum Produktinhalt springen
1 von 5

O2 Oxygen Sensor Upstream Downstream for Ford Escape (2009-2010) 2.5L



Regulärer Preis $75.95
Angebotspreis $75.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

Direct-Fit Upstream & Downstream Oxygen Sensor Kit for 2009-2010 Ford Escape (CD2)

What it Does: This upstream and downstream oxygen sensor kit monitors exhaust oxygen on the 2009-2010 Ford Escape CD2 2.5L Duratec I4 to regulate fuel trim and catalyst efficiency.

The Stock Ford Escape Sensor Degradation

Factory oxygen sensors on the CD2 chassis equipped with the 2.5L Duratec I4 endure constant thermal cycling, moisture condensation, and carbon fouling inside the exhaust stream. Over time, internal heater elements open-circuit and zirconia sensing elements become sluggish, delaying closed-loop fuel transition and skewing PCM air-fuel calculations. Contaminated sensor tips trigger P0130, P0135, P0141, or false P0420 catalyst faults while forcing rich default fuel mapping.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light & DTCs: Stored P0135, P0141, P0130, or P0171 codes from open heater circuits or slow switching.
  • Sluggish Fuel Trim: Delayed warm-up and biased voltage skew closed-loop fueling, causing rough idle.
  • Poor Economy & Emissions: Erratic air-fuel feedback increases fuel consumption and fails OBD-II readiness monitors.

The Direct-Fit Oxygen Sensor Solution

Replacing both sensors as a matched pair restores rapid closed-loop feedback and accurate catalyst monitoring on the 2.5L Duratec I4. Built to match OEM specifications for 234-5113 (upstream) and 234-4609 (downstream), each unit features thermally stable ceramic sensing elements, corrosion-resistant stainless steel housings, and factory-length harnesses with OEM-style weatherproof connectors. Direct-fit threads and pre-terminated plugs allow clean bolt-in installation into stock exhaust bungs without cutting or splicing.

What's Included

  • 1 Upstream Oxygen Sensor (Replaces 234-5113)
  • 1 Downstream Oxygen Sensor (Replaces 234-4609)

Technical Specifications

Fitment 2009-2010 Ford Escape
Engine / Chassis 2.5L Duratec I4 / CD2
Stock Engine Output 171 hp / 171 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 234-4609, 234-5113

Compatibility

  • 2009 Ford Escape 2.5L
  • 2010 Ford Escape 2.5L

Frequently Asked Questions & Fitment Warnings

Does this fit the CD2 Escape?

Yes. Direct fit for the 2009-2010 Ford Escape with the 2.5L Duratec I4. Excludes 3.0L V6 and Hybrid models—confirm engine before ordering.

Will this clear P0135, P0141, or P0420 codes?

Yes, for sensor faults. New 234-5113 and 234-4609 sensors clear sensor codes, though a failed converter still triggers P0420.

Do these sensors require wire splicing during installation?

No. Both sensors use factory-style connectors and OEM lead lengths for direct installation.

The Ford Precision Standard

Accurate exhaust feedback keeps the CD2 Escape at stoichiometric efficiency. Matched sensors restore crisp PCM fuel control and CEL-free emissions compliance.




Passgenauigkeit

Erstellen

Ford

Hubraum

  • 2.5L

Jahr

  • 2009
  • 2010

Garantie

Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

O2 Oxygen Sensor Upstream Downstream for Ford Escape (2009-2010) 2.5L

$75.95