Zum Produktinhalt springen
1 von 5

O2 Oxygen Sensor Upstream Downstream for Fiat 500X (2016-2018) 1.4L



Regulärer Preis $63.95
Angebotspreis $63.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Sensor Kit for 2016-2018 Fiat 500X (334)

What it Does: This matched upstream and downstream oxygen (O2) sensor kit monitors pre- and post-catalyst exhaust oxygen levels on the 2016-2018 Fiat 500X (334) 1.4L MultiAir Turbo (EAM) to regulate closed-loop fuel trim and catalyst efficiency.

The Stock Fiat 500X Oxygen Sensor Failure

On the 334 chassis equipped with the 1.4L MultiAir Turbo (EAM) engine, factory oxygen sensors endure severe thermal cycling right behind the turbocharger outlet. Over time, exhaust soot, oil vapor, and rapid heat soak crack the internal zirconia sensing element and burn out the 12V heater coil. When voltage switching slows or open-circuits, the ECU loses accurate lambda feedback, triggering P0133, P0135, or P0141 fault codes and forcing rich open-loop fueling.

Common Symptoms of a Failing OEM O2 Sensor

  • Check Engine Light / Heater DTCs: Triggers P0133 (slow response), P0135, or P0141 (heater circuit faults).
  • Fuel Trim Drift: Corrupted feedback sets P0171 or P0172 codes, fouling plugs and hurting fuel economy.
  • Failed Emissions Testing: Prevents OBD-II catalyst readiness monitors from completing during state inspections.

The Direct-Fit Zirconia Sensor Solution

Replacing both positions as a matched set restores synchronized lambda telemetry across the catalytic converter on your 334 Fiat 500X. Engineered to replace 234-5707 and 234-4748, these sensors utilize stainless steel housings, laser-welded protective shields, and fast-light-off zirconia elements. Factory-length heat-sleeved harnesses and keyed OEM weatherpack connectors eliminate wire splicing, ensuring accurate factory reference voltage curves and direct thread-in installation.

What's Included

  • 1 Upstream Oxygen Sensor
  • 1 Downstream Oxygen Sensor

Technical Specifications

Fitment 2016-2018 Fiat 500X
Engine / Chassis 1.4L MultiAir Turbo (EAM) / 334
Emissions & Sensor Spec Heated Zirconia / Direct-Fit Upstream & Downstream
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 234-5707, 234-4748

Compatibility

  • 2016-2018 Fiat 500X 1.4L (Confirm engine before ordering)

Frequently Asked Questions & Fitment Warnings

Does this fit the 334 500X?

Yes. This is a direct fit for the 2016-2018 Fiat 500X equipped with the 1.4L MultiAir Turbo (EAM) engine. Excludes 2.4L engines; always confirm your 1.4L engine before ordering.

Will this clear P0133, P0135, or P0141 codes?

Yes. Replacing worn 234-5707 and 234-4748 sensors restores heater resistance and lambda response to resolve P0133, P0135, and P0141 once DTCs are cleared.

Is any wiring modification required for installation?

No. Both sensors include direct-fit OEM connectors; simply chase the exhaust bung threads, apply sensor-safe anti-seize, and torque to spec.

The Fiat Precision Standard

Built for Euro-spec closed-loop ECU precision, this matched O2 sensor kit restores factory air-fuel metering on your 334 Fiat 500X. Maintain clean emissions compliance and CEL-free operation.




Passgenauigkeit

Erstellen

Fiat

Hubraum

  • 1.4L

Jahr

  • 2016
  • 2017
  • 2018

Garantie

Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

O2 Oxygen Sensor Upstream Downstream for Fiat 500X (2016-2018) 1.4L

$63.95