Zum Produktinhalt springen
1 von 3

O2 Oxygen Sensor Upstream Downstream for Chevrolet Traverse (2009-2011) 3.6L



Regulärer Preis $70.95
Angebotspreis $70.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

Direct-Fit O2 Sensor Kit for 2009-2011 Chevrolet Traverse (GMT960)

What it Does: This 4-piece oxygen sensor kit replaces both upstream and downstream sensors on the 2009-2011 Chevrolet Traverse GMT960 (LLT 3.6L V6) to restore closed-loop fuel trim and catalyst monitoring.

The Stock Chevrolet Traverse Sensor Degradation

Factory oxygen sensors on the GMT960 equipped with the LLT 3.6L V6 suffer from severe thermal cycling, carbon fouling, and internal heater burnout. Over time, the zirconia sensing tip becomes sluggish or voltage-biased, preventing the ECM from maintaining stoichiometric air-fuel targets. When pre-cat sensors lose switching speed or post-cat units drift, the vehicle stores P0135, P0155, P0171, or P0420 fault codes and triggers a check-engine light.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light: Triggers heater or efficiency codes like P0135 and P0420.
  • Rough Idle & Hesitation: Biased feedback causes fuel trim imbalance and throttle lag.
  • Failed Emissions: Rich open-loop operation increases fuel burn and blocks readiness monitors.

The Direct-Fit 4-Sensor Solution

Replacing all four sensors simultaneously with OE-grade units matching 234-4815 and 12584050 eliminates bank-to-bank signal mismatch across the V6 exhaust. Each sensor features a fast-heating zirconia ceramic element, stainless steel housing, and factory-indexed connectors. Direct-fit installation eliminates wire splicing—keep anti-seize off the sensing tip, thread by hand to torque spec, and clear stored codes for drive-cycle readiness and accurate fuel trim control.

What's Included

  • 2 Upstream Oxygen Sensors
  • 2 Downstream Oxygen Sensors

Technical Specifications

Fitment 2009-2011 Chevrolet Traverse
Engine / Chassis LLT 3.6L V6 / GMT960
Sensor Architecture 4-Wire Heated Zirconia (2 Upstream / 2 Downstream)
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 234-4815, 12584050, 2344815

Compatibility

  • 2009-2011 Chevrolet Traverse (3.6L V6)

Frequently Asked Questions & Fitment Warnings

Does this fit the GMT960 Traverse?

Yes. Fits 2009-2011 Chevrolet Traverse models with the LLT 3.6L V6. Confirm year, displacement, and connector style before ordering; excludes other engines or model years.

Will this clear P0135 or P0420 codes?

Yes, if sensor-related. Installing sensors matching 234-4815 restores switching signals; clear stored codes and run a full drive cycle afterward.

Is wire splicing required for installation?

No. Direct-fit connectors plug right in; keep grease off the tip and hand-thread before torquing.

The Chevrolet Precision Standard

Built to restore factory ECM fuel precision and emissions readiness, this matched 4-sensor kit keeps your GMT960 running clean and CEL-free.




Passgenauigkeit

Erstellen

Chevrolet

Hubraum

  • 3.6L

Jahr

  • 2009
  • 2010
  • 2011

Garantie

Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

O2 Oxygen Sensor Upstream Downstream for Chevrolet Traverse (2009-2011) 3.6L

$70.95