Zum Produktinhalt springen
1 von 4

O2 Oxygen Sensor Upstream Downstream for Cadillac ATS (2018-2019) 2.0L



Regulärer Preis $111.95
Angebotspreis $111.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

Direct-Fit O2 Oxygen Sensor Kit for 2018-2019 Cadillac ATS (GM Alpha)

What it Does: This matched upstream and downstream oxygen sensor kit monitors exhaust gas oxygen on the 2018-2019 Cadillac ATS (GM Alpha) equipped with the LTG 2.0L Turbo engine to maintain precise closed-loop air-fuel ratios and catalytic converter diagnostics.

The Stock Cadillac ATS Oxygen Sensor Failure

On the GM Alpha chassis equipped with the LTG 2.0L Turbo, factory oxygen sensors endure severe thermal cycling near the turbocharger downpipe. Carbon soot, exhaust moisture, and heat soak gradually degrade the internal zirconia sensing element and burn out the heater circuits. Once sensor switching slows or heaters fail, the ECM loses accurate closed-loop fuel control, triggering P0135, P0141, P0171, or P0420 fault codes and forcing erratic fueling.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Triggers P0131, P0135, or P0141 codes from slow zirconia response or open internal heater circuits.
  • Rough Idle & Hesitation: Skewed fuel trims cause P0171 lean conditions, surging idle, or flat throttle response under boost.
  • Failed Emissions & Poor MPG: Default rich fueling spikes tailpipe hydrocarbons, triggers P0420 efficiency faults, and drops fuel economy.

The Direct-Fit Upstream & Downstream Oxygen Sensor Solution

This matched 234-5150 sensor kit restores factory closed-loop lambda feedback across both pre-cat and post-cat exhaust positions. Each sensor utilizes a laser-welded stainless steel housing and high-temperature zirconia ceramic element engineered to resist turbocharged thermal shock. Exact-length harnesses and pre-terminated OEM weatherpack connectors plug directly into the LTG 2.0L Turbo engine wiring without splicing, ensuring rapid heater warm-up and accurate voltage signaling.

What's Included

  • 1 Upstream Oxygen Sensor
  • 1 Downstream Oxygen Sensor

Technical Specifications

Fitment 2018-2019 Cadillac ATS
Engine / Chassis LTG 2.0L Turbo / GM Alpha
Emissions & Sensor Spec Heated Zirconia / Direct-Fit OEM Connector
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 234-5150

Compatibility

  • 2018-2019 Cadillac ATS 2.0L (Confirm engine before ordering)

Frequently Asked Questions & Fitment Warnings

Does this fit the GM Alpha ATS?

Yes. Fits 2018-2019 Cadillac ATS models equipped with the LTG 2.0L Turbo engine. Excludes 3.6L V6 and ATS-V Twin-Turbo trims; always confirm your engine before ordering.

Will this clear P0135, P0141, or P0420 codes?

Yes, if caused by sensor failure. Replacing both units restores heater resistance and switching speed to clear P0135/P0141 circuit faults and false P0420 alerts.

Are OEM connectors pre-installed for installation?

Yes. Both direct-fit sensors include factory-style plugs for plug-and-play harness connection; torque carefully into clean exhaust bungs.

The Cadillac Precision Standard

Replacing both upstream and downstream sensors as a matched set restores ECM fuel-trim precision and CEL-free operation on your GM Alpha ATS. Built for accurate lambda control under boost, this kit keeps your LTG 2.0L Turbo running cleanly and emissions-compliant.




Passgenauigkeit

Erstellen

Cadillac

Hubraum

  • 2.0L

Jahr

  • 2018
  • 2019

Garantie

Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

O2 Oxygen Sensor Upstream Downstream for Cadillac ATS (2018-2019) 2.0L

$111.95