O2 Oxygen Sensor Upstream Downstream for BMW X1 (2016-2019) 2.0L
Die Abholverfügbarkeit konnte nicht geladen werden
- Garantierte Passgenauigkeit
- Leistungsgeprüft
- Lebenslange Garantie
Sie möchten es bald? Bestellen Sie innerhalb von
Sicher einkaufen
Sicherer Bezahlvorgang mit vertrauenswürdigen Zahlungsanbietern.
Direct-Fit Upstream & Downstream Oxygen Sensor Kit for 2016-2019 BMW X1 (F48)
What it Does: This 2-piece upstream and downstream oxygen sensor kit for the 2016-2019 BMW X1 F48 equipped with the B46 / B48 2.0L engine monitors pre-catalytic air-fuel ratios and post-catalytic converter efficiency for accurate ECU fuel trim control.
The Stock BMW X1 O2 Sensor Failure
On the F48 chassis powered by the B46 / B48 2.0L turbocharged engine, factory oxygen sensors endure severe exhaust heat soak and carbon contamination directly downstream of the turbocharger outlet. Over high mileage, the internal zirconia sensing element degrades while internal heater circuits burn out from continuous thermal cycling. A slow or biased sensor skews lambda readings sent to the DME, disrupting fuel trims and triggering codes like P0130, P0135, P0141, or P0420.
Common Symptoms of a Failing OEM Oxygen Sensor
- Check Engine Light & Lambda DTCs: Stored fault codes such as P0130, P0135, P0141, or P0420 caused by delayed sensor response or open heater circuits.
- Rough Idle & Throttle Hesitation: Biased pre-cat feedback forces inaccurate fuel trim corrections, leading to stumble and inconsistent drivability.
- Higher Fuel Consumption & Failed Emissions: Rich running defaults and incomplete readiness monitors prevent emissions test passage.
The Direct-Fit Upstream & Downstream Oxygen Sensor Solution
This matched 2-piece sensor kit replaces both pre-catalytic and post-catalytic positions simultaneously, restoring synchronized lambda feedback across the exhaust stream. Each unit utilizes precision-calibrated sensing elements, heat-resistant stainless housings, and factory-style weatherproof connectors matching OE numbers 234-5166 and 234-4971 without wire splicing. Direct-fit thread geometry and pre-terminated harnesses ensure leak-free installation into factory exhaust bungs, allowing the B46 / B48 2.0L DME to stabilize fuel trims and complete emissions readiness monitors.
What's Included
- 1x Upstream (Pre-Catalytic Converter) Oxygen Sensor
- 1x Downstream (Post-Catalytic Converter) Oxygen Sensor
Technical Specifications
| Fitment | 2016-2019 BMW X1 |
|---|---|
| Engine / Chassis | B46 / B48 2.0L Turbo I4 / F48 |
| Sensor Architecture | Direct-Fit Pre-Cat Upstream & Post-Cat Downstream Heated O2 Sensors |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Splicing) |
| Replaces OEM Part # | 234-5166, 234-4971 |
Compatibility
- 2016-2019 BMW X1 2.0L (F48 Chassis) — Confirm engine displacement, model year, and connector style prior to ordering
Frequently Asked Questions & Fitment Warnings
Does this fit the F48 X1?
Yes. This is a direct fit for the 2016-2019 BMW X1 equipped with the B46 / B48 2.0L engine. Do not assume coverage for other engines, model years, or mismatched connector styles even when the body style looks identical.
Will this clear P0135, P0141, or P0420 codes?
Yes, when failing sensors are the cause. Installing matched sensors referencing 234-5166 and 234-4971 restores proper lambda feedback; clear stored codes after installation and complete a full drive cycle so readiness monitors reset.
Are wire splicing or special sealants needed for installation?
No splicing is required. Both sensors come with direct-fit connectors; keep grease and anti-seize off the sensing tip, thread each body in by hand, and tighten to factory torque specification.
The BMW Precision Standard
Built to maintain strict European emissions tolerances and DME feedback accuracy, this matched sensor pair restores clean combustion and CEL-free operation on your F48 X1. Replacing both positions together prevents response lag from an aged partner sensor and protects catalytic converter longevity.
Passgenauigkeit
Passgenauigkeit
|
Erstellen |
BMW |
|---|---|
|
Hubraum |
|
|
Jahr |
|
Garantie
Garantie
Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

Sicher einkaufen
In unserem Shopify-Store legen wir größten Wert auf Ihre Sicherheit. So gewährleisten wir ein sicheres Einkaufserlebnis:
1. Sichere Transaktionen: Wir verwenden fortschrittliche Verschlüsselung, um Ihre persönlichen Daten und Zahlungsinformationen zu schützen und sicher zu übertragen.
2. Vertrauenswürdige Zahlungs-Gateways: Unser Store ist in vertrauenswürdige Zahlungs-Gateways integriert, um sicherzustellen, dass Ihre Transaktionen sicher und effizient verarbeitet werden.
3. Datenschutz: Ihre Privatsphäre hat bei uns oberste Priorität. Wir befolgen strenge Datenschutzrichtlinien, um Ihre persönlichen Daten vertraulich und sicher zu behandeln.
4. Sichere Plattform: Shopify bietet robuste Sicherheitsfunktionen und eine kontinuierliche Überwachung gegen Schwachstellen, um eine sichere Einkaufsumgebung zu gewährleisten.
5. Verifizierte Händler: Wir sind ein verifizierter Händler auf Shopify und verpflichten uns, authentische und qualitativ hochwertige Produkte anzubieten.
6. Transparente Richtlinien: Unsere klaren Rückgabe-, Rückerstattungs- und Versandrichtlinien geben Ihnen die Gewissheit, dass wir hinter unseren Produkten stehen.
7. Kundensupport: Unser engagiertes Kundensupport-Team steht Ihnen bei allen Anliegen und Fragen gerne zur Verfügung.
Kaufen Sie mit Vertrauen in unserem Shopify-Store ein, wo Ihre Sicherheit und Zufriedenheit unsere obersten Prioritäten sind.
$88.95