O2 Oxygen Sensor Upstream Downstream for BMW X1 (2013-2015) 2.0L
Die Abholverfügbarkeit konnte nicht geladen werden
- Garantierte Passgenauigkeit
- Leistungsgeprüft
- Lebenslange Garantie
Sie möchten es bald? Bestellen Sie innerhalb von
Direct-Fit Upstream and Downstream Oxygen Sensor Kit for 2013-2015 BMW X1 (E84)
What it Does: The O2 Oxygen Sensor Kit replaces degraded factory air-fuel ratio and catalyst monitor sensors on the 2013-2015 BMW X1 to restore closed-loop fuel trim accuracy and eliminate check engine lights.
The Stock BMW X1 Sensor Degradation
Factory lambda sensors on the E84 platform endure extreme thermal cycling in the exhaust stream of the turbocharged N20 engine. Over time, internal zirconia sensing elements suffer from soot contamination, silica poisoning, and thermal shock. A sluggish pre-catalytic sensor skews target stoichiometric ratios, causing rich running conditions, unburnt hydrocarbon build-up, premature catalytic converter failure, and hesitation under load.
The Engineering Solution
This replacement oxygen sensor kit pairs a fast-reacting pre-cat wideband sensor with a high-accuracy post-cat zirconia sensor. Featuring planar ceramic technology and dual-layer protective sheathing, these direct-fit sensors resist thermal degradation and carbon fouling. Factory-style pin connectors match OE harnesses with zero splicing required, ensuring clean voltage signals back to the Bosch DME for precise short-term fuel trim regulation.
What's Included
- 1x Upstream Oxygen Sensor
- 1x Downstream Oxygen Sensor
Technical Specifications
| Fitment | 2013-2015 BMW X1 |
|---|---|
| Engine / Chassis | N20 / E84 |
| Stock Output | 240 hp / 260 lb-ft |
| Replaces OEM Part # | 0258010418, 0258010419, 0258027029, 11787589121, 11787589122, 234-4562, 234-5054, 758912102, 758912202 |
Compatibility
- 2013-2015 BMW X1 sDrive28i / xDrive28i 2.0L
- BMW 228i 2.0L
- BMW 320i 2.0L
- BMW X3, X4, X5, Z4 (Confirm engine & connector configuration)
Frequently Asked Questions & Fitment Warnings
Does this fit the E84 X1?
Yes, this is a direct fit for the 2013-2015 BMW X1 equipped with the N20 2.0L engine. It does not fit the 3.0L inline-6 (N55) models.
Do I need to recalibrate the DME after installing these sensors?
No software flash is necessary, but clearing active diagnostic trouble codes and resetting engine fuel adaptations via an OBD-II scanner is recommended for immediate closed-loop optimization.
The BMW Precision Standard
Maintain precise lambda control and protect your catalytic converter from unburnt fuel wash with direct-fit sensors designed to meet tight European emissions tolerances.
Passgenauigkeit
Passgenauigkeit
Garantie
Garantie
