Zum Produktinhalt springen
1 von 5

O2 Oxygen Sensor Upstream Downstream for Acura RL (2005-2008) 3.5L



Regulärer Preis $174.95
Angebotspreis $174.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Sensor Kit for 2005-2008 Acura RL (KB1)

What it Does: This 4-piece upstream and downstream oxygen sensor kit monitors exhaust air-fuel ratios and catalytic converter efficiency on the 2005-2008 Acura RL KB1 equipped with the J35A8 3.5L engine.

The Stock Acura RL Sensor Failure

On the KB1 chassis equipped with the J35A8 3.5L V6, factory oxygen sensors endure severe thermal cycling near the close-coupled catalytic converters. Over time, carbon fouling and internal heater element degradation slow switching response and cause voltage drift. When aging DNT224 or 234-5010 units fail, the PCM loses accurate closed-loop fuel trim control. This triggers fault codes such as P0135, P0155, P0134, or P0141.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / Heater DTCs: Triggers codes like P0135, P0155, or P0141 from open sensor heater circuits.
  • Unstable Fuel Trims: Sluggish lambda feedback forces open-loop fueling, causing rough idle and P0171/P0174 codes.
  • Reduced Economy & Emissions Failure: Over-fueling increases tailpipe hydrocarbons and risks catalytic converter overheating.

The Direct-Fit Stainless Oxygen Sensor Solution

This matched 4-piece oxygen sensor kit replaces both Bank 1 and Bank 2 upstream and downstream positions on the KB1 J35A8 platform. Each unit uses a zirconia ceramic sensing element housed in laser-welded stainless steel to resist thermal shock and exhaust condensation. Pre-terminated factory-style connectors eliminate harness splicing during installation. Replacing all DNT224 and 234-5010 sensors together restores balanced bank-to-bank fuel monitoring and rapid closed-loop transition.

What's Included

  • 2 Upstream Oxygen Sensors
  • 2 Downstream Oxygen Sensors

Technical Specifications

Fitment 2005-2008 Acura RL
Engine / Chassis J35A8 3.5L V6 / KB1
Sensor Architecture Direct-Fit Heated Zirconia / OE Plug
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # DNT224, 234-5010

Compatibility

  • 2005-2008 Acura RL 3.5L

Frequently Asked Questions & Fitment Warnings

Does this fit the KB1 RL?

Yes. This is a direct fit for the 2005-2008 Acura RL equipped with the J35A8 3.5L engine. Confirm your 3.5L engine before ordering; this kit does not fit 2009+ 3.7L models.

Will this clear P0135, P0155, or P0141 codes?

Yes. Replacing the faulty upstream and downstream sensors resolves heater circuit and slow-response faults like P0135, P0155, and P0141 once cleared, provided exhaust wiring and converters are intact.

Are factory-style connectors included for installation?

Yes. Each direct-fit sensor features OE-style plugs for solder-free installation; clean the exhaust bungs before torquing the sensors to spec.

The Acura Precision Standard

Engineered for the KB1 platform, this matched sensor set restores factory lambda accuracy and rapid closed-loop control across both cylinder banks. Maintain reliable emissions compliance, crisp throttle response, and CEL-free operation.




Passgenauigkeit

Erstellen

Acura

Hubraum

  • 3.5L

Jahr

  • 2005
  • 2006
  • 2007
  • 2008

Garantie

Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

O2 Oxygen Sensor Upstream Downstream for Acura RL (2005-2008) 3.5L

$174.95