Zum Produktinhalt springen
1 von 4

High Output Alternator for Toyota Corolla (1990-1992) 1.6L



Regulärer Preis $236.95
Angebotspreis $236.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

High-Output 170-Amp Alternator for 1990-1992 Toyota Corolla (AE92)

What it Does: This Made-in-USA 170-amp, 12V alternator replaces the factory unit on the 1990-1992 Toyota Corolla AE92 4A-FE 1.6L to sustain heavy electrical loads.

The Stock Toyota Corolla Charging Bottleneck

Factory alternators (OEM 1002113352 / 1002117000) on the AE92 Corolla 4A-FE 1.6L suffer thermal stress from decades of under-hood heat soak. High temperatures degrade internal voltage regulator circuitry, overheat stator windings, and cause diode rectifier bridge burnout or slip-ring brush wear. Once aging diodes fail, auxiliary lights, audio systems, and cooling fans drain the battery and starve ignition electronics at low RPM.

Common Symptoms of a Failing OEM Alternator

  • Charge Warning Lamp: Battery light illuminates when the regulator drops below 13.8V–14.4V.
  • Load Voltage Drop: Dimming headlights and rough idle under heavy accessory draw.
  • Hard Starting: Chronic undercharging below 12.6V depletes the battery overnight.

The High-Output Alternator Solution

Built in the USA from all-new components—never a rebuilt core or used pull-off—this 170-amp, 12V charging unit handles demanding accessory loads. Its pre-assembled housing integrates a heavy-duty internal regulator, copper windings, and a matched pulley for bolt-on alignment on the 4A-FE 1.6L block. Inspect drive belt tension and battery cables at install to prevent slip or voltage drop at idle.

What's Included

  • 1x New 170-Amp, 12V Alternator (housing, pulley, regulator, internal windings)

Technical Specifications

Fitment 1990-1992 Toyota Corolla
Engine / Chassis 4A-FE 1.6L / AE92
Factory Electrical Output 70 Amps / 12V
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 13240, 1002113352, 1002117000, 2100110, 2100162

Compatibility

  • 1990-1992 Toyota Corolla 1.6L (AE92 / 4A-FE 1.6L)

Frequently Asked Questions & Fitment Warnings

Does this fit the AE92 Corolla?

Yes. Direct fit for 1990-1992 Toyota Corolla 4A-FE 1.6L. Excludes 1988-1989 models, hybrids, and other displacements; verify pulley and connector before ordering.

Will this fix voltage drop, and is 170A constant at idle?

Yes, with sound wiring and belt tension it restores charging voltage. Rated 170A is peak capacity; actual output varies with RPM and load.

Are spacers or mounting hardware included?

No, only the assembled alternator is included. Disconnect the battery, transfer reusable factory dust covers if needed, torque bolts to spec, and verify voltage.

The Toyota Precision Standard

Built for sustained electrical reliability on AE92 platforms, this 170-amp alternator eliminates charging drop-offs. Direct-fit geometry preserves factory packaging while powering auxiliary accessories.




Passgenauigkeit

Erstellen

Toyota

Hubraum

  • 1.6L

Jahr

  • 1990
  • 1991
  • 1992

Garantie

Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

High Output Alternator for Toyota Corolla (1990-1992) 1.6L

$236.95