Zum Produktinhalt springen
1 von 4

High Output Alternator for Toyota Celica (1990-1993) 1.6L



Regulärer Preis $236.95
Angebotspreis $236.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

170-Amp High Output Alternator for 1990-1993 Toyota Celica (AT180)

What it Does: This 170-amp, 12-volt alternator replaces the factory unit on the 1990-1993 Toyota Celica AT180 (4A-FE 1.6L) to sustain electrical output under heavy loads.

The Stock Toyota Celica Charging Bottleneck

On the AT180 chassis with the 4A-FE 1.6L, the aging OEM unit (13240 / 1002113352) frequently suffers heat soak, brush wear, and diode rectifier burnout. When auxiliary lighting or audio loads are added, stator windings overheat and slip rings score, dropping system voltage below 13.5V. This thermal overload triggers dash charge warning lamps and P0562-style low-voltage faults, leaving the battery chronically undercharged.

Common Symptoms of a Failing OEM Alternator

  • Low Voltage Faults: Charge lamp illuminates or meter reads below 13.2V (P0562 low-voltage condition) as the rectifier bridge fails.
  • Dimming Lights & Whine: Flickering headlamps at idle or bearing noise indicate worn brushes or internal stator shorting.
  • Hard Starting: Weak charging current drains the battery during short trips or accessory operation.

The High-Output Direct-Fit Alternator Solution

Built in the USA as a brand-new unit—not a rebuilt core—this 170-amp, 12-volt assembly includes the housing, pulley, internal regulator, and high-efficiency windings ready to bolt on. Its upgraded stator and rectifier sustain higher current than OEM 1002117000 or 2100110 units to support lighting, audio, or recovery gear. Matching mounting ears and connector geometry guarantees a clean OEM-style installation without bracket modification.

What's Included

  • 1 Complete New 170-Amp, 12-Volt Alternator (housing, pulley, regulator, internal windings)

Technical Specifications

Fitment 1990-1993 Toyota Celica
Engine / Chassis 4A-FE 1.6L / AT180
Factory Electrical Output 70 Amps / 12V
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 13240, 1002113352, 1002117000, 2100110, 2100162

Compatibility

  • 1990-1993 Toyota Celica 1.6L (4A-FE / AT180)

Frequently Asked Questions & Fitment Warnings

Does this fit the AT180 Celica?

Yes. Fits 1990-1993 Toyota Celica 4A-FE 1.6L models. Excludes 2.2L, hybrids, and other years; confirm displacement, pulley, and plug before ordering.

Will this eliminate voltage drop under accessory load?

Yes. Rated at 170 amps over the 1002113352 unit, it stabilizes voltage under load when belts and cables are healthy.

What installation prep and hardware reuse are required?

Disconnect the battery. Inspect belts, tensioner, and cables, transfer applicable spacers or dust covers, torque bolts to spec, and test voltage.

The Toyota Performance Standard

Built in the USA for JDM reliability, this unit stabilizes AT180 charging voltage under heavy loads without factory rectifier failure.




Passgenauigkeit

Erstellen

Toyota

Hubraum

  • 1.6L

Jahr

  • 1990
  • 1991
  • 1992
  • 1993

Garantie

Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

High Output Alternator for Toyota Celica (1990-1993) 1.6L

$236.95