High Output Alternator for Mazda MX-6 (1993) 2.5L
Die Abholverfügbarkeit konnte nicht geladen werden
- Garantierte Passgenauigkeit
- Leistungsgeprüft
- Lebenslange Garantie
Sie möchten es bald? Bestellen Sie innerhalb von
Sicher einkaufen
Sicherer Bezahlvorgang mit vertrauenswürdigen Zahlungsanbietern.
200-Amp High Output Alternator for 1993 Mazda MX-6 (GE)
What it Does: This new 200-amp, 12-volt alternator replaces the factory charging unit on the 1993 Mazda MX-6 (GE) KL-DE 2.5L V6 to supply higher electrical current.
The Stock Mazda MX-6 Charging System Bottleneck
On the GE chassis with the KL-DE 2.5L V6, the factory 90-amp alternator (OEM F32Z-10346-B, K801-18-300B) operates near thermal limits under sustained demand. Underhood heat soak degrades internal diode rectifiers, stator insulation, and voltage regulators over time. Running auxiliary lighting, audio amplifiers, or recovery gear causes severe voltage drop and brush wear, triggering low-voltage faults comparable to P0562.
Common Symptoms of a Failing OEM Alternator
- Charging Warning & Voltage Drop: Illuminated battery light or low system voltage (comparable to P0562) from burned rectifier diodes failing to maintain 14V.
- Dimming Lights & Idle Cutout: Headlight flicker and accessory shutdown at idle when electrical draw exceeds aging stator capacity.
- Hard Starting & Depleted Battery: Chronic undercharging weakens battery reserve and strains starter cranking.
The High-Output Direct-Fit Alternator Solution
Built in the USA as a complete new unit—never a rebuilt core or pull-off—this 200-amp alternator includes the housing, pulley, regulator, and internal windings. High-capacity stator windings and heavy-duty rectifier architecture handle elevated amperage loads without thermal breakdown on the GE platform. Designed to bolt directly into factory KL-DE 2.5L V6 mounts, it replaces KL11-18-300E and KL11-18-300R with stock belt alignment.
What's Included
- 1 Complete New 200-Amp 12V Alternator (housing, pulley, voltage regulator, and internal windings)
Technical Specifications
| Fitment | 1993 Mazda MX-6 |
|---|---|
| Engine / Chassis | KL-DE 2.5L V6 / GE |
| Factory Electrical Output | 90 Amps / 12V |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
| Replaces OEM Part # | 13446, 13446-200A, 210-4128, F32Z-10346-B, K801-18-300B, KL11-18-300E, KL11-18-300R, K801-18-300C, KL11-18-300C, KL11-18-300D |
Compatibility
- 1993 Mazda MX-6 2.5L
Frequently Asked Questions & Fitment Warnings
Does this fit the GE MX-6?
Yes. This is a direct fit for the 1993 Mazda MX-6 equipped with the KL-DE 2.5L V6 engine. Excludes hybrid powertrains, other displacements, and non-1993 model years; confirm pulley and connector before ordering.
What pre-installation checks prevent voltage drop?
Inspect the drive belt, tensioner, and battery cables before installation. A 200-amp unit exposes worn belts or weak cables; verify charging voltage at the battery with a meter after startup.
Are special spacers or modifications needed for installation?
No modifications are required. Disconnect the battery prior to removal, transfer factory spacers or dust covers only if designed for reuse, and torque mounting bolts to factory specification.
The Mazda Performance Standard
Engineered in the USA for JDM electrical stability, this alternator sustains clean system voltage across high-RPM pulls and heavy accessory loads on the GE chassis. Reliable current output protects ignition saturation and fuel pump delivery.
Passgenauigkeit
Passgenauigkeit
|
Erstellen |
Mazda |
|---|---|
|
Hubraum |
|
|
Jahr |
Garantie
Garantie
Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

Sicher einkaufen
In unserem Shopify-Store legen wir größten Wert auf Ihre Sicherheit. So gewährleisten wir ein sicheres Einkaufserlebnis:
1. Sichere Transaktionen: Wir verwenden fortschrittliche Verschlüsselung, um Ihre persönlichen Daten und Zahlungsinformationen zu schützen und sicher zu übertragen.
2. Vertrauenswürdige Zahlungs-Gateways: Unser Store ist in vertrauenswürdige Zahlungs-Gateways integriert, um sicherzustellen, dass Ihre Transaktionen sicher und effizient verarbeitet werden.
3. Datenschutz: Ihre Privatsphäre hat bei uns oberste Priorität. Wir befolgen strenge Datenschutzrichtlinien, um Ihre persönlichen Daten vertraulich und sicher zu behandeln.
4. Sichere Plattform: Shopify bietet robuste Sicherheitsfunktionen und eine kontinuierliche Überwachung gegen Schwachstellen, um eine sichere Einkaufsumgebung zu gewährleisten.
5. Verifizierte Händler: Wir sind ein verifizierter Händler auf Shopify und verpflichten uns, authentische und qualitativ hochwertige Produkte anzubieten.
6. Transparente Richtlinien: Unsere klaren Rückgabe-, Rückerstattungs- und Versandrichtlinien geben Ihnen die Gewissheit, dass wir hinter unseren Produkten stehen.
7. Kundensupport: Unser engagiertes Kundensupport-Team steht Ihnen bei allen Anliegen und Fragen gerne zur Verfügung.
Kaufen Sie mit Vertrauen in unserem Shopify-Store ein, wo Ihre Sicherheit und Zufriedenheit unsere obersten Prioritäten sind.
$337.95