Zum Produktinhalt springen
1 von 4

High Output Alternator for Mazda MX-5 Miata (1999-2000) 1.8L



Regulärer Preis $357.95
Angebotspreis $357.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

130-Amp High Output Alternator for 1999-2000 Mazda MX-5 Miata (NB1)

What it Does: This new 130-amp, 12-volt alternator replaces the OEM unit on the 1999-2000 Mazda MX-5 Miata (NB1) BP-4W 1.8L to sustain higher electrical loads.

The Stock Mazda MX-5 Miata Charging Bottleneck

The factory 70-amp unit (LR170-758 / BP4W-18-300B) on the NB1 chassis equipped with the BP-4W 1.8L engine operates near capacity under high engine bay heat. Prolonged thermal soak degrades stator varnish and causes diode rectifier burnout, dropping charging voltage. When cooling fans, headlights, or audio gear draw excess amperage at idle, the aging OEM regulator fails to recover, triggering P0562 or P0560 low-voltage faults.

Common Symptoms of a Failing OEM Alternator

  • Check Engine Light / DTCs: Stored P0562 (System Voltage Low) or P0560 codes when bus voltage drops under load.
  • Voltage Drop Under Load: Dimming headlights and slow windows when cooling fans engage.
  • Hard Starting & Bearing Noise: Undercharged batteries and front-bearing whine from worn windings.

The High-Output 130-Amp Alternator Solution

Built in the USA as a complete new unit rather than a rebuilt core, this 130-amp alternator delivers steady 12-volt output without modifying brackets. Heavy-duty internal copper windings, a robust rectifier bridge, and a matched internal voltage regulator handle sustained electrical demand from upgraded fans or accessories. Supplied assembled with housing and pulley, it bolts directly in place of BP4W-18-300B, BP4W-18-300C, and 13788.

What's Included

  • 1x New 130-Amp High Output Alternator (Assembled Housing, Pulley, Regulator, Windings)

Technical Specifications

Fitment 1999-2000 Mazda MX-5 Miata
Engine / Chassis BP-4W 1.8L / NB1
Factory Electrical Output 70 Amps / 12V
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 13788, 210-3155, LR170-758, BP4W-18-300B, BP4W-18-300C

Compatibility

  • 1999 Mazda MX-5 Miata 1.8L
  • 2000 Mazda MX-5 Miata 1.8L

Frequently Asked Questions & Fitment Warnings

Does this fit the NB1 MX-5 Miata?

Yes. This is a direct fit for the 1999-2000 Mazda MX-5 Miata equipped with the BP-4W 1.8L engine. Excludes earlier or later Miata years, hybrid powertrains, and different engine displacements.

Will this fix P0562 voltage drops from accessories?

Yes. Upgrading from the 70-amp LR170-758 to 130 amps stabilizes charging voltage under accessory load and prevents battery drain when belts and cables are healthy.

Are belts or mounting hardware included?

No. Confirm pulley and connector match before installing, inspect belts, tensioner, and cables for wear, and transfer factory spacers or dust covers if needed.

The Mazda Performance Standard

Engineered for consistent voltage stability across high-RPM street and track driving, this USA-built alternator eliminates charging sag under load while preserving OEM bolt-on NB1 fitment.




Passgenauigkeit

Erstellen

Mazda

Hubraum

  • 1.8L

Jahr

  • 1999
  • 2000

Garantie

Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

High Output Alternator for Mazda MX-5 Miata (1999-2000) 1.8L

$357.95