Zum Produktinhalt springen
1 von 4

High Output Alternator for Jeep Gladiator (2020-2022) 3.6L



Regulärer Preis $418.95
Angebotspreis $418.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

300-Amp High Output Alternator for 2020-2022 Jeep Gladiator (JT)

What it Does: This 300-amp, 12-volt alternator replaces the OEM charging unit on 2020-2022 Jeep Gladiator JT models equipped with the ERC 3.6L Pentastar V6 to maintain stable charging voltage under heavy electrical loads.

The Stock Jeep Gladiator Charging System Bottleneck

The factory alternator on the JT Gladiator with the ERC 3.6L Pentastar V6—including OEM numbers 56029803AA and 421000-7231—struggles under sustained auxiliary loads from winches, lighting, and audio gear. High current draw at low RPM induces severe stator heat soak, accelerating diode rectifier burnout and regulator failure. Once thermal breakdown occurs, charging voltage collapses, triggering PCM fault codes P0562 and P0620 while draining the primary battery.

Common Symptoms of a Failing OEM Alternator

  • DTCs & Warning Lights: Stored fault codes P0562, P0620, or P0622 indicating low system voltage or generator control circuit failure.
  • Voltage Drop Under Load: Dimming lights or weak winch pull when running electrical accessories at idle.
  • Hard Starting: Discharged batteries and erratic Stop-Start operation caused by diode or bearing failure.

The High-Output 300-Amp Alternator Solution

Built as a brand-new 300-amp, 12-volt assembly rather than a rebuilt core, this alternator uses upgraded copper stator windings, heavy-duty rectifiers, and an integrated regulator for sustained thermal durability. An installed overdrive pulley increases rotor speed at idle to prevent voltage sag during winching or trail crawling. Factory-style mounting ears and electrical connectors ensure a direct bolt-on fit on the JT accessory bracket.

What's Included

  • 1x Complete 300-Amp High-Output Alternator (New Assembly with Installed Overdrive Pulley)

Technical Specifications

Fitment 2020-2022 Jeep Gladiator
Engine / Chassis ERC 3.6L Pentastar V6 / JT
Factory Electrical Output 220 Amps / 12V
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 56029803AA, 421000-7231

Compatibility

  • 2020-2022 Jeep Gladiator (JT) — 3.6L Pentastar V6

Frequently Asked Questions & Fitment Warnings

Does this fit the JT Gladiator?

Yes. This is a direct fit for 2020-2022 Jeep Gladiator models with the ERC 3.6L Pentastar V6 engine. Do not install on hybrid powertrains, other displacements, or years outside 2020-2022; compare your pulley and connector before ordering.

Will this clear P0562 codes, and should I swap the stock pulley?

Yes, it resolves charging-related P0562 faults, and no—keep the overdrive pulley installed. Swapping the original pulley reduces idle output; install a slightly shorter serpentine belt if belt slip or squealing occurs.

Are wiring upgrades or special installation steps needed?

Yes, a heavier fused main charging cable is recommended for full 300-amp delivery. Disconnect the battery, reuse compatible OEM spacers or dust covers, torque mounting bolts to factory spec, and verify charging voltage with a meter.

The Jeep Heavy-Duty Standard

Engineered for trail recovery, overland electrical demand, and towing durability, this charging unit prevents voltage collapse under peak loads. Confirm your JT fitment to restore dependable 12V output.




Passgenauigkeit

Erstellen

Jeep

Hubraum

  • 3.6L

Jahr

  • 2020
  • 2021
  • 2022

Garantie

Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

High Output Alternator for Jeep Gladiator (2020-2022) 3.6L

$418.95