High Output Alternator for Infiniti QX70 (2010-2016) 3.5L 3.7L
Die Abholverfügbarkeit konnte nicht geladen werden
- Garantierte Passgenauigkeit
- Leistungsgeprüft
- Lebenslange Garantie
Sie möchten es bald? Bestellen Sie innerhalb von
Sicher einkaufen
Sicherer Bezahlvorgang mit vertrauenswürdigen Zahlungsanbietern.
250-Amp High-Output Alternator for 2010-2016 Infiniti QX70 (S51)
What it Does: This 250-amp, 12-volt alternator replaces the factory generator on the 2010-2016 Infiniti QX70 (S51) with VQ35HR or VQ37VHR engines to deliver increased charging current under heavy accessory loads.
The Stock Infiniti QX70 Charging System Bottleneck
On the S51 chassis equipped with the VQ35HR 3.5L or VQ37VHR 3.7L engine, the factory 150-amp unit (OEM A3TJ1991B) runs near thermal capacity in tight V6 engine bays. Prolonged underhood heat soak degrades internal voltage regulator circuitry and fatigues diode rectifier bridges. When aftermarket lighting, audio amplifiers, or recovery gear draw continuous current, stator windings overheat and voltage drops below 12.6V. This electrical starvation triggers ECM fault codes P0562 and P0620 while accelerating battery sulfation.
Common Symptoms of a Failing OEM Alternator
- Check Engine Light & Charging DTCs: ECM logs P0562 (System Voltage Low) or P0620 (Generator Control Circuit) when regulated output drops under load.
- Voltage Drop & Dimming Electronics: Headlights flicker and dashboard clusters dim at idle as the worn rectifier fails to maintain 13.8V–14.4V.
- Hard Starting & Dead Batteries: Insufficient amperage recovery during short drives leaves the 12V battery undercharged, causing slow cranking and premature cell failure.
The High-Output 250-Amp Alternator Solution
Built in the USA as a brand-new assembly—not a remanufactured core—this 250-amp generator delivers substantially higher stator current than stock 11438 replacements. Precision-wound internal copper coils, a heavy-duty rectifier, and an integrated voltage regulator stabilize charging output across all RPM ranges. Its housing, pulley, and electrical connector match OEM A3TJ1991B mounting geometry for direct bolt-on installation. Pair this upgrade with healthy serpentine belts, tensioners, and primary cables to prevent belt slip and voltage drop.
What's Included
- 1x Complete New 250-Amp, 12V High-Output Alternator (Assembled Housing, Pulley, Regulator, and Internal Windings)
Technical Specifications
| Fitment | 2010-2016 Infiniti QX70 |
|---|---|
| Engine / Chassis | 3.5L VQ35HR / 3.7L VQ37VHR / S51 |
| Factory Electrical Output | 150 Amps / 12V |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
| Replaces OEM Part # | 11438, 11438N, 11438R, A3TJ1991B |
Compatibility
- 2010-2012 Infiniti QX70 3.5L (VQ35HR)
- 2013-2016 Infiniti QX70 3.7L (VQ37VHR)
Frequently Asked Questions & Fitment Warnings
Does this fit the S51 QX70?
Yes. This is a direct fit for the 2010-2016 Infiniti QX70 equipped with the 3.5L VQ35HR (2010-2012) or 3.7L VQ37VHR (2013-2016) engine. Do not install on hybrid powertrains, different engine displacements, or model years outside 2010-2016; confirm pulley and connector match before ordering.
Will this clear P0562 voltage codes, and does it deliver 250 amps at idle?
Yes, replacing a failing OEM unit resolves P0562 and P0620 charging faults. The 250-amp rating represents maximum unit capacity; actual charging output varies with engine RPM and active electrical load.
Are mounting hardware and spacers included, and what prep is required?
No additional hardware is included; reuse factory bolts, spacers, or dust covers if applicable. Disconnect the battery prior to installation, inspect the drive belt, tensioner, and battery cables for wear, torque mounting bolts to factory specs, and verify charging voltage with a meter.
The Infiniti Performance Standard
Engineered for the high-revving VQ35HR and VQ37VHR platforms, this Made-in-USA 250-amp charging unit maintains stable ECU voltage and accessory reliability under demanding street or auxiliary loads. Verify engine displacement and connector style prior to bolt-on installation for trouble-free electrical performance.
Passgenauigkeit
Passgenauigkeit
|
Erstellen |
Infiniti |
|---|---|
|
Hubraum |
|
|
Jahr |
|
Garantie
Garantie
Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

Sicher einkaufen
In unserem Shopify-Store legen wir größten Wert auf Ihre Sicherheit. So gewährleisten wir ein sicheres Einkaufserlebnis:
1. Sichere Transaktionen: Wir verwenden fortschrittliche Verschlüsselung, um Ihre persönlichen Daten und Zahlungsinformationen zu schützen und sicher zu übertragen.
2. Vertrauenswürdige Zahlungs-Gateways: Unser Store ist in vertrauenswürdige Zahlungs-Gateways integriert, um sicherzustellen, dass Ihre Transaktionen sicher und effizient verarbeitet werden.
3. Datenschutz: Ihre Privatsphäre hat bei uns oberste Priorität. Wir befolgen strenge Datenschutzrichtlinien, um Ihre persönlichen Daten vertraulich und sicher zu behandeln.
4. Sichere Plattform: Shopify bietet robuste Sicherheitsfunktionen und eine kontinuierliche Überwachung gegen Schwachstellen, um eine sichere Einkaufsumgebung zu gewährleisten.
5. Verifizierte Händler: Wir sind ein verifizierter Händler auf Shopify und verpflichten uns, authentische und qualitativ hochwertige Produkte anzubieten.
6. Transparente Richtlinien: Unsere klaren Rückgabe-, Rückerstattungs- und Versandrichtlinien geben Ihnen die Gewissheit, dass wir hinter unseren Produkten stehen.
7. Kundensupport: Unser engagiertes Kundensupport-Team steht Ihnen bei allen Anliegen und Fragen gerne zur Verfügung.
Kaufen Sie mit Vertrauen in unserem Shopify-Store ein, wo Ihre Sicherheit und Zufriedenheit unsere obersten Prioritäten sind.
$438.95