Zum Produktinhalt springen
1 von 5

High Output Alternator for Hummer H1 (1996) 5.7L



Regulärer Preis $539.95
Angebotspreis $539.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

400-Amp Hairpin Alternator for 1996 Hummer H1 (HMMWV)

What it Does: This 400-amp, 12V hairpin alternator restores and upgrades charging output on the 1996 Hummer H1 L05 5.7L V8 to power recovery gear and electrical accessories.

The Stock Hummer H1 Charging Bottleneck

The factory 105-amp alternator on the HMMWV platform with the L05 5.7L V8 overheats rapidly under heavy accessory load. Continuous draw from winches, lighting, and audio causes severe heat soak inside the housing, leading to diode rectifier burnout and regulator failure. Once internal diodes short or brushes wear down, charging voltage collapses below 12.6V, triggering P0562 system voltage low or P0620 generator circuit faults.

Common Symptoms of a Failing OEM Alternator

  • Warning Light & DTCs: Stored P0562 or P0620 codes triggered by insufficient alternator output.
  • Voltage Drop Under Load: Dimming lights or stalling recovery gear from severe idle voltage sag.
  • Rectifier Heat & Bearing Noise: Rotor whine, burnt winding odors, or chronic hard starting.

The High-Output Hairpin Alternator Solution

Made in the USA as a new assembly—not a rebuilt core—this 7901-2 unit uses dense 400-amp hairpin stator windings for superior thermal durability. Directly replacing OEM numbers 10463153, 1101493, 10463152, and 1101491, it includes the housing, pulley, internal regulator, and one-wire connection. Its direct-fit geometry bolts onto the 1996 Hummer H1 mounts; inspect belts, tensioners, and battery cables to prevent slip or idle voltage drop.

What's Included

  • 1x Complete 400-Amp High-Output Alternator

Technical Specifications

Fitment 1996 Hummer H1
Engine / Chassis L05 5.7L V8 / HMMWV
Factory Electrical Output 105 Amps / 12V
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 7901-2, 10463153, 1101493, 10463152, 1101491

Compatibility

  • 1996 Hummer H1 — L05 5.7L V8 (Verify pulley and one-wire connector)

Frequently Asked Questions & Fitment Warnings

Does this fit the HMMWV H1?

Yes. Fits the 1996 Hummer H1 equipped with the L05 5.7L V8. Excludes hybrid powertrains, diesel engines, other displacements, and non-1996 model years.

Will this fix P0562 codes and match my wiring?

Yes, replacing a burnt-out unit clears P0562 voltage faults. Compare your original pulley and one-wire connection before ordering.

What installation prep and hardware are required?

Reuses factory bolts; spacers transfer only if compatible. Disconnect the battery, torque bolts to factory spec, and verify charging voltage with a meter.

The Hummer Heavy-Duty Standard

Engineered for off-road recovery and thermal durability, this USA-built 400-amp hairpin unit sustains steady voltage under extreme accessory loads.




Passgenauigkeit

Erstellen

Hummer

Hubraum

  • 5.7L

Jahr

    Garantie

    Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

    High Output Alternator for Hummer H1 (1996) 5.7L

    $539.95