High Output Alternator for Honda Civic (2012-2015) 2.4L
Die Abholverfügbarkeit konnte nicht geladen werden
- Garantierte Passgenauigkeit
- Leistungsgeprüft
- Lebenslange Garantie
Sie möchten es bald? Bestellen Sie innerhalb von
Sicher einkaufen
Sicherer Bezahlvorgang mit vertrauenswürdigen Zahlungsanbietern.
High-Output 320-Amp Alternator for 2012-2015 Honda Civic (FB6/FG4)
What it Does: This 320-amp, 12-volt high-output alternator is a brand-new, direct-fit charging system replacement for the 2012-2015 Honda Civic FB6/FG4 equipped with the K24Z7 2.4L engine, delivering increased amperage to support high-draw electrical accessories.
The Stock Honda Civic Charging Bottleneck
The factory charging unit (31100-RX0-A01 / 104210-1530) on the FB6/FG4 chassis powered by the K24Z7 2.4L engine is engineered for baseline OEM electrical demand and reaches thermal limits under heavy accessory loads. Sustained draw from auxiliary lighting, audio amplifiers, or recovery equipment causes internal stator heat soak that degrades the diode rectifier bridge and voltage regulator. Once the rectifier diodes overheat or output falls behind idle demand, the ECM logs charging faults such as P0562 (System Voltage Low) or P0620 (Generator Control Circuit).
Common Symptoms of a Failing OEM Alternator
- Check Engine Light / Charging DTCs: Battery warning lamp illumination alongside P0562 or P0625 triggered when charging voltage drops below factory ECM thresholds.
- Voltage Sag Under Load: Dimming headlights, flickering cluster illumination, or audio amplifier cutouts at idle when cooling fans and accessories engage.
- Battery Depletion & Hard Starting: Repeatedly discharged batteries, sluggish cranking, or bearing and stator whine resulting from shorted rectifier diodes.
The High-Output 320-Amp Alternator Solution
Supplied as a complete, brand-new 12-volt assembly rather than a remanufactured core, this 320-amp unit bolts directly onto the K24Z7 2.4L mounting bracket using OEM connector geometry. It integrates heavy-duty internal windings, housing, voltage regulator, and a pre-installed overdrive pulley to maximize low-RPM charging capacity. Note that rated 320-amp output varies with engine speed and load, and pairing this upgrade with a heavier fused main charging cable allows full current delivery to the battery.
What's Included
- 1x Complete 320-Amp High-Output Alternator Assembly (Housing, Internal Windings, Voltage Regulator, and Installed Overdrive Pulley)
Technical Specifications
| Fitment | 2012-2015 Honda Civic |
|---|---|
| Engine / Chassis | K24Z7 2.4L / FB6/FG4 |
| Factory Electrical Output | 130 Amps / 12V |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
| Replaces OEM Part # | 104210-1530, 31100-RX0-A01, CSJ53, 31100RX0A01 |
Compatibility
- 2012-2015 Honda Civic 2.4L
Frequently Asked Questions & Fitment Warnings
Does this fit the FB6/FG4 Civic?
Yes. This is a direct fit for the 2012-2015 Honda Civic equipped with the K24Z7 2.4L engine. Do not install on hybrid powertrains, 1.8L or other displacements, or model years outside 2012-2015; verify your pulley and electrical connector match before ordering.
Will this resolve P0562 voltage codes, and can I swap back to the OEM pulley?
Yes, replacing a failing unit clears charging-related P0562 codes, and no—do not reinstall the OEM pulley. Swapping the original pulley onto this unit reduces idle output; keep the pre-installed overdrive pulley in place and use a slightly shorter drive belt if belt slip or squeal occurs.
Are mounting hardware or upgraded charge cables included?
No additional cables are included with the single alternator assembly. Disconnect the battery before installation, transfer OEM spacers or dust covers only if applicable, torque bolts to factory specification, confirm voltage with a meter, and install a heavier fused main charging cable for optimal 320-amp flow.
The Honda Performance Standard
Engineered for high-revving K24Z7 2.4L reliability, this high-output alternator maintains steady system voltage for fuel delivery, ignition coils, and aftermarket electronics under sustained load. Confirm engine displacement and connector style before installation for a clean, trouble-free charging upgrade.
Passgenauigkeit
Passgenauigkeit
|
Erstellen |
Honda |
|---|---|
|
Hubraum |
|
|
Jahr |
|
Garantie
Garantie
Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

Sicher einkaufen
In unserem Shopify-Store legen wir größten Wert auf Ihre Sicherheit. So gewährleisten wir ein sicheres Einkaufserlebnis:
1. Sichere Transaktionen: Wir verwenden fortschrittliche Verschlüsselung, um Ihre persönlichen Daten und Zahlungsinformationen zu schützen und sicher zu übertragen.
2. Vertrauenswürdige Zahlungs-Gateways: Unser Store ist in vertrauenswürdige Zahlungs-Gateways integriert, um sicherzustellen, dass Ihre Transaktionen sicher und effizient verarbeitet werden.
3. Datenschutz: Ihre Privatsphäre hat bei uns oberste Priorität. Wir befolgen strenge Datenschutzrichtlinien, um Ihre persönlichen Daten vertraulich und sicher zu behandeln.
4. Sichere Plattform: Shopify bietet robuste Sicherheitsfunktionen und eine kontinuierliche Überwachung gegen Schwachstellen, um eine sichere Einkaufsumgebung zu gewährleisten.
5. Verifizierte Händler: Wir sind ein verifizierter Händler auf Shopify und verpflichten uns, authentische und qualitativ hochwertige Produkte anzubieten.
6. Transparente Richtlinien: Unsere klaren Rückgabe-, Rückerstattungs- und Versandrichtlinien geben Ihnen die Gewissheit, dass wir hinter unseren Produkten stehen.
7. Kundensupport: Unser engagiertes Kundensupport-Team steht Ihnen bei allen Anliegen und Fragen gerne zur Verfügung.
Kaufen Sie mit Vertrauen in unserem Shopify-Store ein, wo Ihre Sicherheit und Zufriedenheit unsere obersten Prioritäten sind.
$355.95