Zum Produktinhalt springen
1 von 4

High Output Alternator for Ford Fusion (2010-2012) 2.5L



Regulärer Preis $472.95
Angebotspreis $472.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

High-Output 300-Amp Alternator for 2010-2012 Ford Fusion (CD3)

What it Does: This Made-in-USA 300-amp, 12-volt high-output alternator is a direct bolt-on replacement for the 2010-2012 Ford Fusion CD3 with the Duratec 25 2.5L I4 engine, supplying increased charging current for accessories.

The Stock Ford Fusion Charging System Bottleneck

On the CD3 platform powered by the Duratec 25 2.5L I4, the factory 150-amp generator operates near thermal limits when powering aftermarket audio, auxiliary lighting, or recovery gear. Prolonged heat soak degrades the internal rectifier bridge, causing diode burnout and voltage regulator failure inside the housing. As stator windings deteriorate, the PCM logs fault codes such as P0562 and P0620 while starving the battery of charging current at idle.

Common Symptoms of a Failing OEM Alternator

  • Charging Faults & DTCs: Illuminated battery warning lamp and PCM fault codes including P0562, P0620, and P0625.
  • Voltage Drop Under Load: Dimming headlights at idle and system voltage falling below 13.2V when electrical accessories engage.
  • Bearing Noise & Hard Starts: Pulley bearing whine under belt tension and undercharged batteries causing sluggish engine cranking.

The High-Output 300-Amp Alternator Solution

Built completely new in the USA rather than rebuilt from a worn core, this 300-amp / 12-volt assembly stabilizes system voltage under continuous electrical demand. Its upgraded internal windings, voltage regulator, machined pulley, and ventilated housing dissipate heat more effectively than stock 9R5T10300BB and A2TX1691 units. Engineered to match OEM mounting points and connector geometry, it bolts directly in place without custom bracket fabrication.

What's Included

  • 1x Complete New 300-Amp, 12-Volt Alternator (Pre-assembled housing, pulley, regulator, and internal windings)

Technical Specifications

Fitment 2010-2012 Ford Fusion
Engine / Chassis Duratec 25 2.5L I4 / CD3
Factory Electrical Output 150 Amps / 12V
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 11272, GL990, 11542, 9R5T10300BB, A2TX1691

Compatibility

  • 2010-2012 Ford Fusion 2.5L (Non-Hybrid Models Only)

Frequently Asked Questions & Fitment Warnings

Does this fit the CD3 Fusion?

Yes. This is a direct fit for the 2010-2012 Ford Fusion equipped with the Duratec 25 2.5L I4 engine. Excludes Hybrid powertrains, V6 displacements, and years outside 2010-2012; verify your pulley and electrical connector prior to ordering.

Will this resolve P0562/P0620 codes, and what prep is required?

Yes, when caused by a failed alternator or regulator. Disconnect the battery, inspect the serpentine belt, tensioner, and battery cables to prevent slip or voltage drop at idle, and verify charging voltage with a meter after startup.

Are external regulators or custom brackets required?

No. It ships pre-assembled for bolt-on installation; transfer reusable factory spacers or dust covers from the original unit if applicable and torque mounting bolts to factory specification.

The Ford Heavy-Duty Electrical Standard

Engineered for CD3 owners requiring dependable amperage headroom, this 300-amp alternator maintains consistent charging recovery and thermal stability. Upgrade your 2.5L charging architecture with US-built durability engineered for demanding electrical loads.




Passgenauigkeit

Erstellen

Ford

Hubraum

  • 2.5L

Jahr

  • 2010
  • 2011
  • 2012

Garantie

Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

High Output Alternator for Ford Fusion (2010-2012) 2.5L

$472.95