Zum Produktinhalt springen
1 von 3

High Output Alternator for Ford Explorer (2006-2008) 4.6L



Regulärer Preis $290.95
Angebotspreis $290.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

250-Amp High Output Alternator for 2006-2008 Ford Explorer (U251)

What it Does: This 250-amp, 12-volt alternator replaces the factory unit on 2006-2008 Ford Explorer U251 models with the 4.6L 3V Modular V8 for higher charging capacity.

The Stock Ford Explorer Charging Bottleneck

The factory 130-amp alternator on the U251 chassis with the 4.6L 3V Modular V8 runs near its thermal limit when powering lighting, audio amplifiers, or recovery gear. Engine bay heat soak degrades stator windings and causes diode rectifier burnout. As brushes wear or the regulator fails, voltage drops below spec, forcing the battery to supply accessories and triggering faults like P0562 or P0620.

Common Symptoms of a Failing OEM Alternator

  • Check Engine Light / DTCs: Triggers P0562 or P0620 when charging voltage drops under load.
  • Voltage Drop & Dimming: Headlights flicker and voltage sags at idle with accessories running.
  • Hard Starting: Weak recharge current drains the battery, causing slow cranking.

The 250-Amp High-Output Alternator Solution

Built in the USA as a brand-new assembly—not a rebuilt core—this 250-amp unit upgrades U251 charging output. Heavy-duty copper windings, a robust rectifier, and an integrated regulator sustain high amperage across engine speeds without overheating. The pre-installed pulley, housing, and connector replace OEM numbers 8448, 6L2T10300AB, 6L2T10300AD, and 6L2Z10346A for direct bolt-on fitment on the 4.6L 3V Modular V8.

What's Included

  • 1x Complete 250-Amp High-Output Alternator (Housing, Pulley, and Regulator Assembled)

Technical Specifications

Fitment 2006-2008 Ford Explorer
Engine / Chassis 4.6L 3V Modular V8 / U251
Factory Electrical Output 130 Amps / 12V
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 8448, 6L2T10300AB, 6L2T10300AD, 6L2Z10346A

Compatibility

  • 2006-2008 Ford Explorer 4.6L (U251)

Frequently Asked Questions & Fitment Warnings

Does this fit the U251 Explorer?

Yes. Direct fit for the 2006-2008 Ford Explorer 4.6L 3V Modular V8. Excludes hybrids, 4.0L V6 engines, and other model years; verify pulley and connector before ordering.

Will this clear P0562 or P0620 codes?

Yes, if caused by a failed alternator. Restoring 12V charging resolves P0562 and P0620 once belt tension and battery cables are checked.

What prep is needed for installation?

Disconnect the battery and inspect drive parts. Check belt, tensioner, and cables to avoid slip or voltage drop, torque bolts to spec, and verify battery voltage.

The Ford Heavy-Duty Standard

Engineered for SUVs running auxiliary lighting, audio, or recovery gear, this USA-made unit delivers dependable electrical headroom under high underhood heat.




Passgenauigkeit

Erstellen

Ford

Hubraum

  • 4.6L

Jahr

  • 2006
  • 2007
  • 2008

Garantie

Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

High Output Alternator for Ford Explorer (2006-2008) 4.6L

$290.95