Zum Produktinhalt springen
1 von 6

Drive Belt Tensioner Kit for BMW M2 (2016-2020) 3.0L



Regulärer Preis $180.95
Angebotspreis $180.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

Direct-Fit Drive Belt Tensioner Kit for 2016-2020 BMW M2 (F87)

What it Does: This kit replaces the serpentine belt, tensioner, and both idler pulleys on the F87 BMW M2 N55B30T0 3.0L to maintain accessory drive tension.

The Stock BMW M2 Tensioner Failure

Under high-RPM loads and heat soak, the factory idler bearings and tensioner spring on the F87 chassis lose preload and grease retention. Worn pivot bushings in the N55B30T0 3.0L tensioner allow arm deflection, causing serpentine misalignment and rib glazing. Reduced belt wrap starves the alternator, triggering low-voltage codes like P0562 and P0560. Left unaddressed, a snapped belt can breach the front crank seal.

Common Symptoms of a Failing OEM Tensioner Kit

  • Charging Faults: Accessory warnings or P0562 codes from belt slip.
  • Audible Noise: Squeal, chirp, or bearing whine from worn pulleys.
  • Belt Wear: Cracked ribs, frayed edges, or belt walk-off.

The Direct-Fit Serpentine Drive Solution

This matched kit replaces OEM parts 11288604266, 11288673720, 11287615130, and 11287628659 simultaneously to restore factory belt geometry. Its cast-aluminum tensioner maintains calibrated spring torque across the RPM sweep, eliminating harmonic whip on the N55B30T0 3.0L. Sealed idler bearings resist thermal grease breakdown, while the EPDM drive belt seats cleanly into factory pulley grooves for direct bolt-on installation.

What's Included

  • 1 Drive Belt Tensioner
  • 2 Idler Pulleys
  • 1 Drive Belt

Technical Specifications

Fitment 2016-2020 BMW M2
Engine / Chassis N55B30T0 3.0L Inline-6 / F87
Stock Engine Output 365 hp / 343 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 11288673720, 11288604266, 11287628659, 11287615130, 11287615130-9

Compatibility

  • 2016-2020 BMW M2 — 3.0L Gas Turbocharged

Frequently Asked Questions & Fitment Warnings

Does this fit the F87 M2?

Yes. Direct fit for 2016-2020 BMW M2 with the N55B30T0 3.0L engine. Not for 2.0L or 4.4L models; confirm year and engine before ordering.

Are a water pump or fan included?

No. This kit includes 1 tensioner (11288604266), 2 idler pulleys, and 1 drive belt (11287628659); water pump and timing parts are excluded.

Is installation a direct bolt-on service?

Yes. Relieve tension, remove old parts, install the new tensioner, pulleys, and belt to factory torque specs, and confirm full groove seating.

The BMW Precision Standard

Engineered to restore OE belt-drive tolerances on the F87 platform, replacing all wear items together prevents repeat teardowns. This ensures consistent alternator output and fault-free operation.




Passgenauigkeit

Erstellen

BMW

Hubraum

  • 3.0L

Jahr

  • 2016
  • 2017
  • 2018
  • 2019
  • 2020

Garantie

Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

Drive Belt Tensioner Kit for BMW M2 (2016-2020) 3.0L

$180.95