Zum Produktinhalt springen
1 von 6

Drive Belt Tensioner Kit for BMW 3 Series (2012-2016) 3.0L



Regulärer Preis $180.95
Angebotspreis $180.95 Regulärer Preis
Versand wird an der Kasse berechnet.
  • Garantierte Passgenauigkeit
  • Leistungsgeprüft
  • Lebenslange Garantie

Sie möchten es bald? Bestellen Sie innerhalb von

I18n Error: Missing interpolation value "end_date" for "Endet am {{ end_date }}"

Direct-Fit Accessory Drive Belt Tensioner Kit for 2012-2016 BMW 3 Series (F30)

What it Does: This kit restores calibrated serpentine belt tension and pulley alignment on the 2012-2016 BMW 3 Series F30 N55 3.0L to drive front-engine accessories.

The Stock BMW 3 Series Accessory Drive Failure

On the F30 chassis powered by the N55 3.0L engine, sustained underhood heat soak weakens the factory tensioner spring and dries out sealed idler bearings. As tensioner damping fades under high load, belt tracking drifts and rubber ribs crack prematurely. A thrown belt can wedge behind the crank pulley, triggering low-voltage codes like P0562 and risking severe front-seal damage.

Common Symptoms of a Failing OEM Drive Belt Tensioner Kit

  • Charging System DTCs: Belt slip drops alternator output, triggering P0562 low-voltage fault codes.
  • Cold-Start Chirp or Squeal: Seized idler bearings or a weak tensioner cause audible squeal at idle.
  • Cracked Belt Ribs: Glazed rubber risks belt derailment and sudden accessory power loss.

The Direct-Fit Serpentine Drive Solution

Replacing the tensioner, both idler pulleys, and drive belt together eliminates repeat labor from a leftover pulley failure. Built to replace OEM numbers 11288673720, 11288604266, 11287628659, and 11287615130, this assembly maintains calibrated preload across the N55 3.0L rev range. Sealed high-temperature bearings and a multi-rib EPDM belt bolt directly into OEM factory mounts without modification.

What's Included

  • 1x Drive Belt Tensioner
  • 2x Idler Pulleys
  • 1x Drive Belt

Technical Specifications

Fitment 2012-2016 BMW 3 Series
Engine / Chassis N55 3.0L Gas Turbocharged / F30
Stock Engine Output 300 hp / 300 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 11288673720, 11288604266, 11287628659, 11287615130, 11287615130-9

Compatibility

  • 2012-2016 BMW 3 Series — 3.0L Gas Turbocharged

Frequently Asked Questions & Fitment Warnings

Does this fit the F30 3 Series?

Yes. Direct fit for the 2012-2016 BMW 3 Series equipped with the N55 3.0L gas turbocharged engine. Not compatible with 2.0L four-cylinder or 4.4L V8 applications.

How many pulleys are included, and will this fix belt-slip charging warnings?

Two idler pulleys, one belt tensioner, and one drive belt. Replacing all components together prevents repeat pulley failure and resolves belt-slip P0562 charging faults.

Is a water pump included, and how is it installed?

No; water pump, fan, and timing-chain parts are excluded. Relieve belt tension, install components in factory routing, torque fasteners to spec, and verify groove seating.

The BMW Precision Standard

Built for strict European tolerances, this kit restores quiet belt tracking and P0562-free charging stability on your F30 N55 3.0L.




Passgenauigkeit

Erstellen

BMW

Hubraum

  • 3.0L

Jahr

  • 2012
  • 2013
  • 2014
  • 2015
  • 2016

Garantie

Für alle Produkte gilt unsere eingeschränkte lebenslange Garantie. Wir stehen hinter unserer Qualität. [Siehe Bedingungen]

Drive Belt Tensioner Kit for BMW 3 Series (2012-2016) 3.0L

$180.95