Catalytic Converter for Ford Transit Connect (2014-2016) 1.6L

Direct-Fit Stainless Catalytic Converter for 2014-2016 Ford Transit Connect (V408)

What it Does: Direct-fit catalytic converter for the V408 2014-2016 Ford Transit Connect 1.6L EcoBoost, restoring flow and EPA emissions compliance.

The Stock Ford Transit Connect Exhaust Failure

Under sustained turbocharged exhaust temperatures, the factory converter on the V408 chassis with the 1.6L EcoBoost engine suffers thermal fatigue and substrate fracture. Repeated heat cycling cracks the OE braided flex section and degrades the internal ceramic monolith, causing exhaust leaks ahead of the downstream oxygen sensor. Reduced oxygen storage capacity triggers persistent P0420/P0430 catalyst efficiency faults alongside excessive exhaust backpressure.

Common Symptoms of a Failing OEM Catalytic Converter

• Check Engine Light / DTCs: Triggered P0420/P0430 codes from depleted washcoat or flex leaks.
• Metallic Rattle: Broken ceramic substrate rattling inside the V408 converter housing.
• Power Loss: Exhaust restriction hurting turbo spool and OBD-II inspection readiness.

The Direct-Fit Stainless Exhaust Solution

Engineered as a one-piece welded assembly, this replacement pairs a corrosion-resistant stainless steel body (8-inch length, 5-inch height) with an integrated braided flex pipe and intermediate pipe. Inside, a high-flow ceramic honeycomb substrate with precious-metal washcoat converts HC, CO, and NOx to satisfy EPA federal OBD-II standards. Factory flanges, heat shield, hanger rods, and dual O2 sensor bungs ensure leak-free direct bolt-on fitment.

What's Included

• 1 x Catalytic Converter with integrated flex pipe
• 1 x Ring Seal
• 1 x 2-Bolt Flange Gasket
• 2 x Bolts with nuts and washers

Technical Specifications

Compatibility

• 2014-2016 Ford Transit Connect XL (1.6L EcoBoost Turbo I4)
• 2014-2016 Ford Transit Connect XLT (1.6L EcoBoost Turbo I4)
• 2014-2016 Ford Transit Connect Titanium (1.6L EcoBoost Turbo I4)

Frequently Asked Questions & Fitment Warnings

Does this fit the V408 Transit Connect?

Yes. Direct fit for 2014-2016 Ford Transit Connect 1.6L EcoBoost models. Excludes 2.5L engines; not CARB-approved (illegal in CA, NY, CO, ME).

Will this clear P0420/P0430 codes, and are O2 sensors included?

Yes, if caused by a worn converter; O2 sensors are excluded. Reuse existing sensors or install new ones after checking for upstream leaks.

Are gaskets and hardware included for installation?

Yes. Includes the ring seal, flange gasket, and bolts; torque fasteners evenly after cooling.

The Ford Precision Standard

Built for V408 commercial durability, this converter restores ECU fuel-trim precision and CEL-free OBD-II operation. Stainless steel construction resists heat cracking under turbocharged service.