Description
BMM V2.0 is a professional fault diagnosis tool designed specifically for BMW/MINI vehicles. It is an easy to use, stand alone unit that will have you scanning your vehicle within minutes. Simply, plug it into the OBDII port and the device will boot up with step-by-step instructions. This scanner has a large, easy to read 4 inch color display accompanied by a user friendly interface that requires no additional software. As an added bonus, the scanner is equipped with full OBDII capabilities that allows you to scan all engine readings and related trouble codes (check engine light) on ANY vehicle make/model 1996 and newer.(U.S. only)
Features (All Features will not work on ALL Models)
Oil/Service/Brake Service Reset Function
The iCarsoft 2nd Generation Diagnostic Tools allow you to reset Oil, Service, and Brake Lights in a click of a button on supported vehicles. On vehicles where a manual reset is required, the tool will guide you through the full process step-by-step.
Battery Management System (BMS)
Registers new battery to the BMS during battery replacement.
EPB Reset Function
Brake Pad / Shoe changes on vehicles equipped with EPB's (Electronic Parking Brakes) MUST be carried out using a Diagnostic Tool to correctly re-calibrate. The iCarsoft 2nd Generation Tools offer you that capability on supported models. De-activate to Service Position - Replace - Re-activate.
ECTS Reset Function
After cleaning or replacing the Electronic Throttle Body (ECTS), adaptation must be carried out (also the case if the negative terminal of the battery has been disconnected or when the Engine Control Unit has been replaced). The iCarsoft 2nd Generation Tools will perform Electronic Throttle Body adaptations on supported vehicles.
SAS Reset Function
The Steering Angle Sensor (SAS) is used to measure the angle of the steering wheel and the speed at which it is being turned. The signal is mainly used by the ABS System as part of it's stability control function but also by other systems such as ride level control and adaptive lighting. A problem with the SAS Signal will cause a fault with any of the systems that use the signal directly, or indirectly.
If the Steering Angle Sensor (SAS) needs to be changed, many vehicle's require the new sensor to be calibrated. The iCarsoft 2nd Generation Tool will allow you to carry out steering angle re-calibration on supported models.
DPF Regeneration or Replacement
Carry out a forced Diesel Particulate Filter (DPF) Regeneration on supported vehicles - this MUST be done by trained personnel. Required when the DPF filter blockage reaches levels where passive or active regeneration is unable to burn off the excess soot. The iCarsoft 2nd Generation Tool is also capable of adapting a new DPF Filter where supported.
Injector Coding
Brake Bleeding
Reset Air Bag Lights
FOR BMW MODEL YEARS 1996-present
***** Round Port Adapter Required for Vehicles 1996-2000 (sold separately)
1 Series - E81,E82,E87,E88,1M,F20,F21
2 Series - F22,F23,F45,F46,F87
3 Series - E36,E46,E90,E91,E92,E93,F30,F31,F34,F35,F80
4 Series - F32,F33,F36,F82,F83
5 Series - E39,E60,E61,M5,GT(F07),F10,F11,F18
6 Series - E63,E64,M6,F12,F13
7 Series - E38,E65,E66,F01,F02,F03,F04,G11,G12
X1 - E84,F48,F49
X3 - E83,F25
X4 - F26
X5 - E53,E70,X5M,F15,F85
X6 - E71,E72,X6M,F16,F86
Z3 - E36,Z3M
Z4 - E85,E86,E89,M
I Series - I01,I23
MINI For Most Models 2001-Present
Body Styles Covered
R50: "Mk I" Mini One & Cooper (2001–2006)
R52: "Mk I" Mini Convertible (2004–2008)
R53: "Mk I" Mini Cooper S (2001–2006)
R55: "Mk II" Mini Clubman (2007–2014)
R56: "Mk II" Mini Hatch/Hardtop range (2006–2013)
R57: "Mk II" Mini Convertible (2009–present)
R58: Coupé (2012–present)
R59: Roadster (2012–present)
R60: Countryman (2010–present)
R61: Paceman (2013–2016)
F55: 5-Door Hatch (2015–present)
F66: Mini Hatch/Hardtop (2014–present)
1. Diagnose Single Brand of most Models (OBDII-16DLC)
2. Full System Diagnosis
3. Support Oil Service Reset
4. Electronic Parking Brake (EPB) system maintenance
5. Battery Management System (BMS)
6. Diesel Particulate Filter (DPF) Regeneration Control System
7. Electronic Throttle Control System (ETC)
8. Steering Angle Sensor (SAS) Calibration
9. Read &Clear DTC
10. Read Live Data
11. Full Speed Upgrade via PC
12. 4.0″ TFT LCD, 480*320 Pixels
13. Support Battery Test
14. Support Multi-Language
15. Support Data Review and Print
Universal OBDII Functions Include *Added Bonus*(for all makes and models 96 and newer):
1. Read Codes
2. Erase Codes
3. I/M Readiness -- I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
4. Data stream.
5. Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
6. O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
7. On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
8. Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
9. Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
11.Turn off Check Engine Light (MIL), clear codes and reset monitors
12. Read live PCM DataStream
13. Support CAN (Controller Area Network) and all other
14. Multilingual menu and DTC definitions- English, Spanish, and German, etc
15. Read pending DTCs
16. Read permanent DTCs
17. DTCs search
18. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
19. Works on most of 2001 and later OBDII compliant PETROL European vehicles
20. Works on most of 2004 and later OBDII compliant DIESEL European vehicles
21. Works on most of 1996 and later OBDII compliant US and Asian vehicles
22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More
