{"product_id":"cold-air-intake-for-toyota-celica-gts-2000-2005-1-8l-l4-engine-red","title":"Cold Air Intake for Toyota Celica GTS (2000-2005) 1.8L L4 Engine Red","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch1\u003eCold Air Intake Kit for Toyota Celica GT \/ GT-S 1.8L (2000–2005) - Horsepower Gain \u0026amp; Fuel Efficiency\u003c\/h1\u003e\n\u003cp\u003eThis cold air intake kit is designed to replace the factory air box on 2000–2005 Toyota Celica GT and GT-S models equipped with the 1.8L L4 VVT-i or VVTL-i engine. The system reduces intake restriction by using T-306 aluminum piping with mandrel bends and a high-flow reusable air filter. This results in improved throttle response, enhanced airflow efficiency, and measurable gains in horsepower and torque across the RPM range.\u003c\/p\u003e\n\u003cp\u003eThe intake uses larger diameter aluminum tubing compared to the factory intake tract, creating a less restrictive path for incoming air. The design allows the engine to draw cooler, denser air for improved combustion efficiency. The high-flow filter is washable and reusable, eliminating the need for replacement filters during routine maintenance intervals.\u003c\/p\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2000–2005 Toyota Celica GT (1.8L L4 VVT-i Engine)\u003c\/li\u003e\n\u003cli\u003e2000–2005 Toyota Celica GT-S (1.8L L4 VVTL-i Engine)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePerformance \u0026amp; Design\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAirflow Optimization:\u003c\/strong\u003e The system is engineered to improve airflow efficiency by eliminating restrictive elements in the factory air box assembly. The T-306 aluminum piping with precision mandrel bends provides smooth airflow to the engine. Testing under controlled conditions has shown potential gains of 7–10% in horsepower and 6–8% in torque. Actual performance improvements will vary based on vehicle condition, elevation, ambient temperature, and existing modifications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThrottle Response:\u003c\/strong\u003e The reduced intake restriction and cooler, denser air allow the engine to operate more efficiently during acceleration. This results in improved throttle response and power delivery throughout the RPM range. The improved combustion efficiency may contribute to fuel economy gains during steady-state driving conditions.\u003c\/p\u003e\n\u003ch2\u003eConstruction \u0026amp; Materials\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eT-306 Aluminum Construction:\u003c\/strong\u003e The intake pipe is constructed from T-306 high-grade aluminum with a durable finish. The aluminum construction provides corrosion resistance and reduces weight compared to factory plastic components. The precision mandrel bends maintain consistent internal diameter throughout each bend, ensuring smooth airflow without internal restrictions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilter Design:\u003c\/strong\u003e The high-flow air filter uses washable filter media designed for superior filtration and long-term use. The filter can be cleaned, re-oiled, and reused, eliminating the need for replacement filters. The open-element design produces a more audible intake sound during acceleration.\u003c\/p\u003e\n\u003ch2\u003eFeatures \u0026amp; Components\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eT-306 high-grade aluminum intake piping\u003c\/li\u003e\n\u003cli\u003ePrecision mandrel bends for smooth airflow\u003c\/li\u003e\n\u003cli\u003eHigh-flow washable and reusable air filter\u003c\/li\u003e\n\u003cli\u003eDirect replacement for factory air box assembly\u003c\/li\u003e\n\u003cli\u003eReduces intake restriction for improved airflow\u003c\/li\u003e\n\u003cli\u003eEnhances throttle response across RPM range\u003c\/li\u003e\n\u003cli\u003eProduces deeper, sportier intake sound\u003c\/li\u003e\n\u003cli\u003eReusable filter reduces long-term maintenance costs\u003c\/li\u003e\n\u003cli\u003eCompatible with VVT-i and VVTL-i engines\u003c\/li\u003e\n\u003cli\u003eIncludes MAF sensor adapter if required for specific model\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eT-306 aluminum intake pipe\u003c\/li\u003e\n\u003cli\u003eHigh-flow reusable air filter\u003c\/li\u003e\n\u003cli\u003eComplete mounting hardware set (clamps, brackets)\u003c\/li\u003e\n\u003cli\u003eSilicone hoses and couplers\u003c\/li\u003e\n\u003cli\u003eVacuum fittings and reducers\u003c\/li\u003e\n\u003cli\u003eMAF sensor adapter (included if needed for model)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement for factory air box system\u003c\/li\u003e\n\u003cli\u003eUses existing factory mounting points\u003c\/li\u003e\n\u003cli\u003eNo cutting or drilling required\u003c\/li\u003e\n\u003cli\u003eInstallation time approximately 45–60 minutes\u003c\/li\u003e\n\u003cli\u003eBasic hand tools required (screwdrivers, socket wrenches)\u003c\/li\u003e\n\u003cli\u003eNo tuning required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e\u003cbr\u003eAfter installation, disconnect the negative battery terminal for approximately 30 seconds to allow the engine control unit to reset. This allows the ECU to recalibrate fuel delivery and ignition timing parameters to optimize performance with the modified airflow characteristics. Always disconnect the battery before performing any engine bay work. The ECU will continue to adapt during normal driving operation.\u003c\/p\u003e\n\u003ch2\u003eFilter Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eInspection Schedule:\u003c\/strong\u003e Inspect the air filter every 5,000 miles and clean if necessary. Driving conditions such as dusty environments, spirited driving, or heavy traffic may require more frequent inspection and cleaning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCleaning Procedure:\u003c\/strong\u003e Remove the filter from the intake tube. Gently tap the filter to remove loose debris. Apply an appropriate air filter cleaning solution to both the inside and outside of the filter element, working it into the filter media. Allow the cleaner to soak for approximately 10 minutes. Rinse the filter thoroughly with low-pressure water from the clean side out, continuing until water runs clear. Shake off excess water and allow the filter to air dry completely in a clean environment. Once fully dry, apply air filter oil evenly to the filter media according to product specifications. Allow the oil to wick through the filter material for approximately 20 minutes before reinstalling. Ensure the filter is completely dry before applying oil, as moisture will prevent proper oil absorption.\u003c\/p\u003e\n\u003ch2\u003eCompatibility Requirements\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eModel Verification:\u003c\/strong\u003e This cold air intake kit is designed specifically for 2000–2005 Toyota Celica GT and GT-S models equipped with 1.8L L4 engines (VVT-i or VVTL-i). The kit includes a MAF sensor adapter if required for specific model years. Verify your vehicle's model and engine type before purchase to ensure proper fitment.\u003c\/p\u003e\n\u003cp\u003eThis cold air intake kit provides improved airflow characteristics for 1.8L VVT-i and VVTL-i engines while maintaining reliable filtration through a washable, reusable filter element. The T-306 aluminum construction with precision mandrel bends reduces restriction and improves airflow efficiency. The complete hardware set includes all necessary components for installation, including MAF sensor adapter if required. The system is designed to work with factory engine management components without requiring tuning or additional modifications.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"VelocityMax","offers":[{"title":"Default Title","offer_id":47758433255672,"sku":"DS-CELICA-RINTAKE","price":119.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/1290\/2648\/files\/celica_red__72858.1616431202.1280.1280.jpg?v=1767728885","url":"https:\/\/performancechiptuning.com\/products\/cold-air-intake-for-toyota-celica-gts-2000-2005-1-8l-l4-engine-red","provider":"Performance Chip Tuning","version":"1.0","type":"link"}