{"product_id":"cold-air-intake-for-ford-mustang-1994-1998-with-3-8l-v6-engine-black","title":"Cold Air Intake for Ford Mustang (1994-1998) 3.8L V6 Engine - Black","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eCold Air Intake for Ford Mustang 3.8L V6 (1994–1998) - Power Increase \u0026amp; Throttle Enhancement\u003c\/h2\u003e\n\u003cp\u003eThis cold air intake system is designed to replace the factory air box on 1994–1998 Ford Mustang models equipped with the 3.8L V6 engine. The system reduces intake restriction by using T304 aluminum piping with a black powder-coated finish and a high-flow air filter. This results in improved throttle response, enhanced airflow efficiency, and measurable gains in horsepower and torque across the RPM range.\u003c\/p\u003e\n\u003cp\u003eThe intake uses larger diameter aluminum tubing compared to the factory intake tract, creating a less restrictive path for incoming air. The design allows the engine to draw cooler, denser air for improved combustion efficiency. The high-flow filter maintains adequate filtration while reducing restriction compared to the factory paper element.\u003c\/p\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1994–1998 Ford Mustang (3.8L V6 Engine, All Trims)\u003c\/li\u003e\n\u003cli\u003eFactory horsepower: approximately 150 HP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePerformance \u0026amp; Design\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAirflow Optimization:\u003c\/strong\u003e The system is engineered to improve airflow efficiency by eliminating restrictive elements in the factory air box assembly. Testing under controlled conditions has shown potential gains of up to 8% in horsepower with the intake system alone. When combined with engine tuning, gains may reach 14% or higher. Actual performance improvements will vary based on vehicle condition, elevation, ambient temperature, and existing modifications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThrottle Response:\u003c\/strong\u003e The reduced intake restriction allows the engine to draw air more efficiently during acceleration. This results in improved throttle response and power delivery throughout the RPM range. The improved combustion efficiency may contribute to fuel economy gains during highway cruising and steady-state driving conditions.\u003c\/p\u003e\n\u003ch2\u003eConstruction \u0026amp; Materials\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eT304 Aluminum Construction:\u003c\/strong\u003e The intake pipe is constructed from T304 aluminum with a black powder-coated finish. The aluminum construction provides corrosion resistance and reduces weight compared to factory plastic components. The material handles engine bay heat without warping or degrading over time. The powder-coated finish provides additional protection against scratches and fading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilter Design:\u003c\/strong\u003e The high-flow air filter uses washable filter media that can be cleaned and reused. The filter provides adequate filtration while maintaining lower restriction than factory paper elements. The open-element design produces a more audible intake sound during acceleration.\u003c\/p\u003e\n\u003ch2\u003eFeatures \u0026amp; Components\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eT304 aluminum intake piping with black powder-coated finish\u003c\/li\u003e\n\u003cli\u003eHigh-flow washable and reusable air filter\u003c\/li\u003e\n\u003cli\u003eDirect replacement for factory air box assembly\u003c\/li\u003e\n\u003cli\u003eReduces intake restriction for improved airflow\u003c\/li\u003e\n\u003cli\u003eEnhances throttle response across RPM range\u003c\/li\u003e\n\u003cli\u003eProduces deeper intake sound under acceleration\u003c\/li\u003e\n\u003cli\u003eLightweight construction compared to factory components\u003c\/li\u003e\n\u003cli\u003eHeat-resistant materials for engine bay conditions\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eT304 aluminum intake pipe (black powder-coated)\u003c\/li\u003e\n\u003cli\u003eHigh-flow washable air filter\u003c\/li\u003e\n\u003cli\u003eMounting clamps and hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement for factory air intake system\u003c\/li\u003e\n\u003cli\u003eBolt-on installation design\u003c\/li\u003e\n\u003cli\u003eNo cutting or drilling required\u003c\/li\u003e\n\u003cli\u003eInstallation time approximately 45–60 minutes\u003c\/li\u003e\n\u003cli\u003eBasic hand tools required (screwdrivers, socket wrenches)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e\u003cbr\u003eAfter installation, disconnect the negative battery terminal for approximately 30 seconds to allow the engine control unit to reset. This allows the ECU to recalibrate fuel delivery and ignition timing parameters to optimize performance with the modified airflow characteristics. The ECU will continue to adapt during normal driving operation.\u003c\/p\u003e\n\u003ch2\u003eFilter Maintenance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eInspection Schedule:\u003c\/strong\u003e Inspect the air filter every 5,000 miles and clean if necessary. Driving conditions such as dusty environments, performance driving, or heavy traffic may require more frequent inspection and cleaning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCleaning Procedure:\u003c\/strong\u003e Remove the filter from the intake tube. Gently tap the filter to remove loose debris. Apply an appropriate air filter cleaning solution to both the inside and outside of the filter element, working it into the filter media. Allow the cleaner to soak for approximately 10 minutes. Rinse the filter thoroughly with low-pressure water from the clean side out, continuing until water runs clear. Shake off excess water and allow the filter to air dry completely in a clean environment. Once fully dry, apply air filter oil evenly to the filter media according to product specifications. Allow the oil to wick through the filter material for approximately 20 minutes before reinstalling. Ensure the filter is completely dry before applying oil, as moisture will prevent proper oil absorption.\u003c\/p\u003e\n\u003ch2\u003ePerformance Expectations\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePower Gains:\u003c\/strong\u003e Testing has shown potential horsepower increases from the factory rating of approximately 150 HP to approximately 162 HP (8% gain) with the intake system alone. When combined with engine tuning, gains may reach approximately 171 HP (14% gain) or higher depending on tuning parameters. These figures represent controlled testing conditions and actual results will vary based on vehicle condition and modifications.\u003c\/p\u003e\n\u003cp\u003eThis cold air intake system provides improved airflow characteristics for the 3.8L V6 Mustang engine while maintaining reliable filtration through a washable, reusable filter element. The T304 aluminum construction with black powder-coated finish provides durability and heat resistance in the engine bay environment. The system is designed to work with factory engine management components and offers additional performance potential when combined with engine tuning.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"VelocityMax","offers":[{"title":"Default Title","offer_id":47758432207096,"sku":"DS-MUSTANG-INTAKE","price":109.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/1290\/2648\/files\/mustang_black_1__03419.1614663730.1280.1280.jpg?v=1769299667","url":"https:\/\/performancechiptuning.com\/products\/cold-air-intake-for-ford-mustang-1994-1998-with-3-8l-v6-engine-black","provider":"Performance Chip Tuning","version":"1.0","type":"link"}