Description
Type: Digital LCD Multimeter Voltmeter Ohmmeter Ammeter
- 100% brand new and high quality
- Product size: 17.5cm x 10.7cm x 7.5cm
- AC Voltage Range:: 200/600V
- Input Protection Features: HRC Fuse, Shunt Resistor
- DC Voltage Range:: 200mV/2/20/200/600VFeatures: Auto Power Off, Auto-Ranging,
Backlight, Battery Door Access, Data
- Resistance:: 200/2k/20k/200k/2MO
- Model: DM850
- Diode & Audible Continuity:: Diode testing 2.4V,1.5mA; Buzzer Sounds<30±20O
SPECIAL FEATURES
- Low Battery Indication
- Data Hold
- 3 Digit LCD MAX 1999
- Test/Measurement Functions: AC Current, AC Voltage, Capacitance, Continuity Test,
DC Current, DC Voltage, Diode Test, Duty Cycle
- Dynatron: Yes
- Continuity Buzzer
- Sample Rate: 3times/S
- Low Battery Indication
- Accuracy: ±a% of reading: ± N0 digits.
- Working temperature : 23?±2?.
- Relative Humidity: <75%
Product Details
- FRONT PANEL DESCRIPTION 1. FUNCTION AND RANGE SWITCH This switch is used to
select the function ano desired range as well as to turn on the instrument.To extend
the life of this battery, the switch should be in the "OFF" position when the nstrument is
not in use. 2. DISPLAY 3? digit, 7 segment, 0.5" high LCD. 3. "Common" JACK Plug in
connector for black (negative) test lead 4. "VQmA" JACK Plug in connector for red
(Positive) test lead for all voltage and resistance and current (except 10A)
measurements. 5. "10A JACK Plug in connector to red (positive) test lead for 10A
measurement.
Note:
- Please do not change the inner circuit to aviod damaging the ammeter
- Do not connect it to the voltage over 1000VDC or 750VAC
- Make sure not connect the error measure range
- Please do not use the ammeter if the back cover is wrong
- Please remove the pen and cut off the power before replacing battery and fuze
- Do not directly plug into the socket to measure the current
otherwise, the meter will be damaged
- Please read the instructions for specific measurement methods
